Applications
If during this learning process the maximum number of remote sites has been reached, the router will prompt you that there are no remote sites available. A new remote site cannot be
Manual Configuration - LMI Type
The LMI Type option allows you to manually specify the type of Link Management Interface in use by the Frame Relay service provider for the Frame Relay service.
When the LMI type is set to none, the router simply creates frame relay packets and sends them on the defined PVC’s. The links are not checked for errors. There is no congestion control checking. The link is only monitored for control signals.
To manually configure the LMI type the
Location: Main
ªConfiguration
ªWAN
ªLink
ªFrame Relay
ª
LMI Type | |
| |
| Location: Main |
| ªConfiguration |
| ª WAN |
| ª Link |
| ª Frame Relay |
| ª LMI Type |
| The configuration options described here are only for initial |
| purposes. For more complete information on all of the configuration parameters |
| available please refer to the “P1705 & P1730 Menus Reference Manual” file on the |
| accompanying |
34