Omega Vehicle Security zSeries manual Dns, Default IP Address

Page 21

3.4 DNS

DNS, Domain Name System enables individual computers and devices to be recognized over a network based on a specific name instead of an IP address.

For example, instead of having to use http://192.168.1.200 (IP address), you would use only http://z03ec or any sixteen character name stored as Host Name under Access Control menu in the zSeries Home Page.

The default DNS name for the Coordinator is "z" followed by the last four digits of the MAC address of that particular Coordinator.

1. It is very important to communicate with the network administrator in order to understand the DHCP and its existing configurations on the host server,

before enabling the DHCP on the Coordinator.

2. The Coordinators are shipped with a default static IP address of 192.168.1.200 and Subnet Mask of 255.255.255.0.

3. On Novell networks or Windows 2000 where the DCHP is an updated function of DNS this feature may be beneficial since a particular name can be assigned eliminating the need for the IP address.

3.5 IP Address

Every active device connected to the TCP/IP network must have a unique IP address. This IP address is used to establish a connection to the Coordinator. Every computer using TCP/IP should have a unique 32-bit address which is divided into two portions, the network ID and the host ID. For instance, every computer on the same network uses the same network ID. At the same time, all of them have a different host ID. For more details about the IP address see Appendix B.

3.5.1 Default IP Address

The Coordinator is shipped with a default IP address of 192.168.1.200 and Subnet Mask of 255.255.255.0. If you are going to use a Web browser or Telnet program to access the Coordinator using its default IP address, make sure that the PC from which you’re establishing the connection has an IP address that is in the same range as the Coordinator’s IP address (192.168.1.x, where x can be any number from 1 to 254). See Section 3.5.2.

Your PC’s IP address cannot be the same as the Coordinator’s IP address. You also need to make sure that your PC’s Subnet Mask is 255.255.255.0. This is a good way to access the Coordinator over the network and make any configuration changes needed. If 192.168.1.200 is already in use on your network, use an Ethernet crossover cable between your computer and the Coordinator to change the IP address or any other settings within the Coordinator.

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents User’sGuide Page Table of Contents Appendix B Appendix aAppendix C Appendix DList of Figures Page Features Part Introduction EMC ConsiderationsDescription Description ZSeries Wireless System on the Ethernet Network Part Hardware RearFrom TOP to Bottom Disassembly of the End Device Disassembly End DeviceParts of the Coordinator Mounting the Coordinator Dimensions and Mounting CoordinatorDevice ID did 8 Position DIP Switch Setup DIP Switches DIP Switch Setup Device ID didDIP Switch Setup Network ID NID NIDDefinitions Ethernet 4 Position DIP Switch Setup DIP Switch Setup Ethernet Coordinator10 RJ45 Pinout 2 10Base-T Crossover Wiring Part Network Configuration Network ProtocolsDhcp Default IP Address DNSIP Address Section Network ConnectionsPart Operations Using the Telnet or Web browserIConnect Software Accessing the zSeries System for Configuration Access Control Setting a New IP Address over the NetworkCoordinator’s Configurations and Operations Wireless Sensors HomePower Up Device Select Readings by Group Get Readings from the End DeviceTheReadings fields are defined as follows Java Runtime Environment 1.4 Setup instructions Java Runtime Environment Setup10 Java 1.5.x.x. Screen Shots Accessing Coordinators units using the internet DiagnosticsAccessing Coordinators units over Peer-to-Peer network Java Policy file and copy it onto a folder Java PolicyGrant codeBase http//192.168.1.200 Permission java.security.AllPermission12 Java Policy Djava.security.policy=C\0JAVAPOLICY\javapolicy.txt13 Select Chart by Group ChartChart 15 Diagnostic Diagnostic16 Configuration Configuration17 Sensor Setup by Group Sensor SetupUpdate Checked Box 18 Sensor SetupSensor Parameters Host Name Web ServerHTTPget Program Telnet SetupHttpget -r -S Erdgall 192.168.1.1352000 -C1 -q HTTPget using PortWhere 2000Arp -s 192.168.1.200 00-03-34-00-00-06-b6 HTTPget and ARP to Setup Device IP AddressHttpget -r -S 00000000 192.168.1.2001 where ARP Protocol22 ARP Commands and Responses 23 iLog Software Logging Data for End Deice #1, 3 ILog SoftwareMail Notifier Software InstallationEmail Setup Email Address SetupEQNF003 Device Setting and ConfigurationMail Notifier Device Setting Alarm EditorPart Environment / Operating ConditionsGeneral Deployment Guidelines Operation in Buildings Control Room OfficeDistance feet Radius feet With Line-of-SightMaterial Type Possible Signal Reduction Without Line-of-SightCasing and Closure Around the Antenna Channels Fine Adjustment in PerformanceRelative Humidity Part 6 SpecificationsApprovals Dhcp DIP SwitchesAppendix Aglossary Appendix BIP Address Address Class Mask Binary Value Mask Decimal Value Appendix CIP NetmaskOr Dotted Notation Mask Dotted Notation Mask Binary Mask BitsAscii Ascii Chart Dec Hex BinaryDec Binary Char No Parity No parityAppendix D Ascii Chart Continuation Dec Hex Ctrl Key Ascii Control Codes DefinitionChar Equiv Appendix E ILog Error Messages Error # Description Erdg Telnet Commands TableResponse 7 EngrLAB 01000010 Appendix F Telnet Commands TableAppendix G Frequently Asked Questions FAQ OpenLost Page WARRANTY/DISCLAIMER Shop on line at omega.com
Top Page Image Contents