Omega Vehicle Security zSeries manual HTTPget and ARP to Setup Device IP Address, ARP Protocol

Page 46

4.5.2 HTTPget and ARP to Setup Device IP Address

Use the iConnect software, which may be downloaded from our website, to do these IP changes whenever possible.

Use ARP first to assign the mac address to a static IP address in computer arp table by this command:

arp –s 192.168.1.200 00-03-34-00-00-06-b6

Then use the following command to assign new IP to the device:

Httpget –r –S "00000000" 192.168.1.200:1 where:

“0000000” is admin. password. If the password is wrong, the unit will ignore the new IP. If the new IP is taken, you will get the message " New IP is Assigned" after the HTTPget command. The device will reset automatically.

“192.168.1.200” is an example of an IP address. It is replaced with IP address suitable for your network

“00-03-34-00-00-06-b6” is replaced with your Coordinator MAC address.

4.6 ARP Protocol

ARP is the Internet layer protocol responsible for matching or obtaining the MAC (hardware) address that corresponds to a particular IP address. The ARP command allows the user to view the current contents of the ARP cache of the local computer (residing on the same network). Microsoft includes the ARP.EXE utility for viewing and modifying the ARP cache with its Windows products. The following ARP commands can be used to view cache entries:

•arp –a Use this command to view all ARP cache entries.

•arp –a plus➞ IP address Use this command to view ARP cache entries associated with one particular interface➞ on a network with multiple adapters.

•arp –g Same as arp –a.

•arp –N ➞ Use this command to display ARP entries for specific network interface.

•arp – s ➞plus IP address plus Physical address Use this command to manually

add a permanent static entry to the ARP cache➞ .

•arp –d plus IP address ➞ Use this command to manually delete a static entry.

40

Image 46

Contents User’sGuide Page Table of Contents Appendix C Appendix aAppendix B Appendix DList of Figures Page Features EMC Considerations Part IntroductionDescription Description ZSeries Wireless System on the Ethernet Network Rear Part HardwareFrom TOP to Bottom Disassembly End Device Disassembly of the End DeviceParts of the Coordinator Dimensions and Mounting Coordinator Mounting the CoordinatorDIP Switches DIP Switch Setup Device ID did Device ID did 8 Position DIP Switch SetupNID DIP Switch Setup Network ID NIDDefinitions DIP Switch Setup Ethernet Coordinator Ethernet 4 Position DIP Switch Setup10 RJ45 Pinout 2 10Base-T Crossover Wiring Network Protocols Part Network ConfigurationDhcp DNS Default IP AddressIP Address Network Connections SectionUsing the Telnet or Web browser Part OperationsIConnect Software Accessing the zSeries System for Configuration Setting a New IP Address over the Network Access ControlWireless Sensors Home Coordinator’s Configurations and OperationsPower Up Device Get Readings from the End Device Select Readings by GroupTheReadings fields are defined as follows Java Runtime Environment Setup Java Runtime Environment 1.4 Setup instructions10 Java 1.5.x.x. Screen Shots Diagnostics Accessing Coordinators units using the internetAccessing Coordinators units over Peer-to-Peer network Grant codeBase http//192.168.1.200 Java PolicyJava Policy file and copy it onto a folder Permission java.security.AllPermissionDjava.security.policy=C\0JAVAPOLICY\javapolicy.txt 12 Java PolicyChart 13 Select Chart by GroupChart Diagnostic 15 DiagnosticConfiguration 16 ConfigurationSensor Setup 17 Sensor Setup by Group18 Sensor Setup Update Checked BoxSensor Parameters Web Server Host NameTelnet Setup HTTPget ProgramWhere HTTPget using PortHttpget -r -S Erdgall 192.168.1.1352000 -C1 -q 2000Httpget -r -S 00000000 192.168.1.2001 where HTTPget and ARP to Setup Device IP AddressArp -s 192.168.1.200 00-03-34-00-00-06-b6 ARP Protocol22 ARP Commands and Responses ILog Software 23 iLog Software Logging Data for End Deice #1, 3Installation Mail Notifier SoftwareEmail Address Setup Email SetupDevice Setting and Configuration EQNF003Alarm Editor Mail Notifier Device SettingEnvironment / Operating Conditions PartGeneral Deployment Guidelines Control Room Office Operation in BuildingsWith Line-of-Sight Distance feet Radius feetWithout Line-of-Sight Material Type Possible Signal ReductionCasing and Closure Around the Antenna Fine Adjustment in Performance ChannelsPart 6 Specifications Relative HumidityApprovals DIP Switches DhcpAppendix Aglossary Appendix BIP Address Or Dotted Notation Appendix CIP NetmaskAddress Class Mask Binary Value Mask Decimal Value Mask Dotted Notation Mask Binary Mask BitsDec Binary Ascii Chart Dec Hex BinaryAscii Char No Parity No parityDec Hex Ctrl Key Ascii Control Codes Definition Appendix D Ascii Chart ContinuationChar Equiv Appendix E ILog Error Messages Error # Description Telnet Commands Table ErdgAppendix F Telnet Commands Table Response 7 EngrLAB 01000010Open Appendix G Frequently Asked Questions FAQLost Page WARRANTY/DISCLAIMER Shop on line at omega.com