NetComm V110 manual PPPoE Client Mode, User Name

Page 17

PPPoE Client Mode

1.Click on WAN on the left menu.

2.Change the IP Type to DHCP.

3.Enter the username and password supplied by your Internet Service Provider.

4.After that, click the Submit button.

Option	Description

User Name	Your PPPoE username. This is normally specified by your Internet Service Provider (ISP).

Password	Password for the above PPPoE account.

Service Name	The name of your service provider. (Optional)

5.Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings.

6.The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.

YML881Rev1	�V110,��V2��10P,��V2��11,��V220�� User Guide
www.netcomm.com.au	17

Image 17

Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Minimum System Requirements Package ContentsGetting to know your NetComm V2xx ATA ResetPorts and Buttons Port / Button DescriptionPWR LED IndicatorsSIP ETHDhcp Default SettingsRestoring Factory Defaults V211 and V210P Hardware InstallationV110 V220 V110,V210P,V211,V220 User Guide Easy Setup Utility for Windows Only Software ConfigurationAccessing the web configuration Configuration via a web browserWAN Configuration MAC Static IP ConfigurationOption Description YML881Rev1 Ethernet MAC address of the WAN interface. Optional Dhcp ModeYour Internet Service Provider ISP. Optional User Name PPPoE Client ModeVoIP Configuration Field Description Advanced Configuration System Information StatusNetwork Status VoIP StatusWAN ConfigurationOptions Description VoIP SIP Setting Auth Name RTP Port Base port to receive RTP packets. DefaultUse DNS SRV Support DNS SRVCodec Settings V110,V210P,V211,V220 User Guide URL Phone Book ConfigurationPhone Book Example 2 Position 1, Name ip address 10.32, Number 001, URL Add New PhoneYML881Rev1 IP/ON Phone SettingYML881Rev1 V110,V210P,V211,V220 User Guide To set the volume for on your handset Volume Setting functionV211 only is to set the Pstn volume out DND AlwaysV110,V210P,V211,V220 User Guide Enter the correct PIN Code 1234, then press # How to Use VoIP to Pstn Call Call in via VoIPHow to Use Pstn to VoIP Call Call in via Pstn CID Type Enable to detect the Caller ID Type Single Caller ID Enable to detect Single Caller IDEnable to detect the Caller ID without time 2,3,4,5,6,7,8,9 Wildcard Drop PrefixDialed V110,V210P,V211,V220 User Guide YML881Rev1 Port Default is Switch on to enable T.38 fax supportAuto Dial Time function FAXSupport Others Enable Auto Configuration. DefaultoffYML881Rev1 Supports the proprietary implementation DefaultWALKERSUN2 Computer’s MAC that was originally set up for such an ISPOptions Description MAC Clone Ddns 110, V2 10P, V2 11, V220 User Guide CFI Vlan SettingsVirtual Server Default page is Page1. There are 3 pages, Page 1 toNum Mapping 23 that can be setSeen from the WAN side Add the new Server which you configuredAdd Virtual Server UDP TCP Well Known TCP/UDP PortsSmtp POP3If the primary server becomes unreachable Sntp SettingsAlarm Settings System Authority Save Settings/RebootSystem Reset factory defaultFirmware Update Update via Auto UpdateServer TFTP, FTP or Http FirmwareDisplays the next update or check time Notify Only Auto Update ProcedureBe noted AutomaticallyGroup IVR Action IVR Menu Choice Parameters IVR Interface for VoIP GatewayCall Features How to make a phone callDial a VoIP Phone call Dial a Pstn Phone call V210P/V211Call Hold Way ConferencingCall Waiting No power to the ATA Common problem and solutionsPlease ensure that the power cable is connected correctly ETH light is offATA Appendix a GlossaryLimitations of Warranty Product WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Email support@netcomm.com.au Product Warranty Contact Information