NetComm V110 manual Vlan Settings, Cfi

Page 50

VLAN Settings

You can set the VLAN settings in this page.

Options

Description

 

 

VLAN Packets

When enabled the ATA will receive VLAN Packets function.

 

 

VID (802.1Q/TAG)

Configure the Virtual LAN ID (VLAN ID or VID) for VLAN Server.

 

The VLAN Identifier is a 12-bit field. It uniquely identifies the VLAN to which the frame

 

belongs. The field can have a value between 2 and 4094. (Default 136).

 

 

User Priority

Default is 0. Configure user priority.

(802.1P)

Also known as user priority, this 3-bit field refers to the IEEE 802.1p priority. The field

 

 

indicates the frame priority level which can be used for the prioritization of traffic. The

 

field can represent 8 levels (0 through 7).

 

 

CFI

The Canonical Format Indicator is a 1-bit field.

 

If the value of this field is 1, the MAC address is in non-canonical format. If the value is

 

0, the MAC address is in canonical format.

 

 

DMZ

A DMZ Host PC is set up ‘between’ your (private) LAN and the (public) WAN to allow access from the outside world to a specified and isolated zone on your network. It is most commonly used to provide access to a Web server or Game server without exposing the rest of your computers to the Internet. Turn on the DMZ and enter the IP address of the DMZ computer and click Submit. The computer with that IP address can then serve web pages or games to the outside world, while the rest of your network remains private.

V110,V210P,V211,V220User Guide

YML881Rev1

50

www.netcomm.com.au

Image 50
Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Package Contents Minimum System RequirementsPorts and Buttons ResetGetting to know your NetComm V2xx ATA Port / Button DescriptionSIP LED IndicatorsPWR ETHDhcp Default SettingsRestoring Factory Defaults Hardware Installation V211 and V210PV110 V220 V110,V210P,V211,V220 User Guide Software Configuration Easy Setup Utility for Windows OnlyConfiguration via a web browser Accessing the web configurationWAN Configuration MAC Static IP ConfigurationOption Description YML881Rev1 Ethernet MAC address of the WAN interface. Optional Dhcp ModeYour Internet Service Provider ISP. Optional PPPoE Client Mode User NameVoIP Configuration Field Description Advanced Configuration Network Status StatusSystem Information VoIP StatusConfiguration WANOptions Description VoIP SIP Setting Use DNS SRV RTP Port Base port to receive RTP packets. DefaultAuth Name Support DNS SRVCodec Settings V110,V210P,V211,V220 User Guide URL Phone Book ConfigurationPhone Book Add New Phone Example 2 Position 1, Name ip address 10.32, Number 001, URLYML881Rev1 Phone Setting IP/ONYML881Rev1 V110,V210P,V211,V220 User Guide V211 only is to set the Pstn volume out Volume Setting functionTo set the volume for on your handset DND AlwaysV110,V210P,V211,V220 User Guide Enter the correct PIN Code 1234, then press # How to Use VoIP to Pstn Call Call in via VoIPHow to Use Pstn to VoIP Call Call in via Pstn CID Type Enable to detect the Caller ID Type Single Caller ID Enable to detect Single Caller IDEnable to detect the Caller ID without time 2,3,4,5,6,7,8,9 Wildcard Drop PrefixDialed V110,V210P,V211,V220 User Guide YML881Rev1 Auto Dial Time function Switch on to enable T.38 fax supportPort Default is FAXSupport Enable Auto Configuration. Defaultoff OthersYML881Rev1 Default Supports the proprietary implementationWALKERSUN2 Computer’s MAC that was originally set up for such an ISPOptions Description MAC Clone Ddns 110, V2 10P, V2 11, V220 User Guide Vlan Settings CFINum Default page is Page1. There are 3 pages, Page 1 toVirtual Server Mapping 23 that can be setSeen from the WAN side Add the new Server which you configuredAdd Virtual Server Smtp Well Known TCP/UDP PortsUDP TCP POP3Sntp Settings If the primary server becomes unreachableAlarm Settings Save Settings/Reboot System AuthoritySystem Reset factory defaultFirmware Update Server TFTP, FTP or Http Auto UpdateUpdate via FirmwareBe noted Notify Only Auto Update ProcedureDisplays the next update or check time AutomaticallyIVR Interface for VoIP Gateway Group IVR Action IVR Menu Choice ParametersDial a VoIP Phone call How to make a phone callCall Features Dial a Pstn Phone call V210P/V211Call Hold Way ConferencingCall Waiting Please ensure that the power cable is connected correctly Common problem and solutionsNo power to the ATA ETH light is offAppendix a Glossary ATAProduct Warranty Limitations of WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Product Warranty Contact Information Email support@netcomm.com.au