NetComm V110 manual Supports the proprietary implementation, Default

Page 46

FXO & FXS Impedence Setting

You can select the FXO & FXS Impedence Setting for a different country. Please leave as default unless otherwise instructed.

Options	Description

FXO Port	Select Impedence for the FXO port. (only on V211)

FXS Port	Select Impedence for the FXS port.

STUN Setting

You can enable/disable the STUN feature and configure the STUN Server IP address in this page. This function can help your ATA to work properly behind a NAT device. To change these settings please follow your VoIP Service Provider’s information.

Options	Description

STUN	When enabled the NetComm ATA uses STUN (Simple Transversal of UDP through NAT)
	if the unit is behind a NAT enabled router and the router has no ALG for SIP, or NONE
	to disable STUN (VoIP Gateway is not to use STUN for NAT traversal). VoIP Gateway
	also supports a proprietary implementation of NAT traversal where the Service provider
	is expected to provide some relay support. If NONE is selected, then based on the
	responses received, the VoIP Gateway will dynamically determine if the SIP Server
	supports the proprietary implementation.
	Note: Even when STUN is enabled, the VoIP Gateway does an automatic detection of the presence of SIP
	ALG and disables the use of STUN. This is to avoid some media problems arising out of the behavior of
	some ALGs when STUN is used at the user end.

STUN Server	Enter the IP address or host name of the STUN server.

STUN Port	Enter the port number on which the STUN server listens for requests from the ATA.
	(default : 3478)

V110,V2�10P,V2�11,V220� User Guide	YML881Rev1
46	www.netcomm.com.au

Image 46

Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Package Contents Minimum System RequirementsPorts and Buttons ResetGetting to know your NetComm V2xx ATA Port / Button DescriptionSIP LED IndicatorsPWR ETHRestoring Factory Defaults Default SettingsDhcp Hardware Installation V211 and V210PV110 V220 V110,V210P,V211,V220 User Guide Software Configuration Easy Setup Utility for Windows OnlyConfiguration via a web browser Accessing the web configurationWAN Configuration Option Description Static IP ConfigurationMAC YML881Rev1 Your Internet Service Provider ISP. Optional Dhcp ModeEthernet MAC address of the WAN interface. Optional PPPoE Client Mode User NameVoIP Configuration Field Description Advanced Configuration Network Status StatusSystem Information VoIP StatusConfiguration WANOptions Description VoIP SIP Setting Use DNS SRV RTP Port Base port to receive RTP packets. DefaultAuth Name Support DNS SRVCodec Settings V110,V210P,V211,V220 User Guide Phone Book Phone Book ConfigurationURL Add New Phone Example 2 Position 1, Name ip address 10.32, Number 001, URLYML881Rev1 Phone Setting IP/ONYML881Rev1 V110,V210P,V211,V220 User Guide V211 only is to set the Pstn volume out Volume Setting functionTo set the volume for on your handset DND AlwaysV110,V210P,V211,V220 User Guide How to Use Pstn to VoIP Call Call in via Pstn How to Use VoIP to Pstn Call Call in via VoIPEnter the correct PIN Code 1234, then press # Enable to detect the Caller ID without time Single Caller ID Enable to detect Single Caller IDCID Type Enable to detect the Caller ID Type Dialed Drop Prefix2,3,4,5,6,7,8,9 Wildcard V110,V210P,V211,V220 User Guide YML881Rev1 Auto Dial Time function Switch on to enable T.38 fax supportPort Default is FAXSupport Enable Auto Configuration. Defaultoff OthersYML881Rev1 Default Supports the proprietary implementationOptions Description MAC Clone Computer’s MAC that was originally set up for such an ISPWALKERSUN2 Ddns 110, V2 10P, V2 11, V220 User Guide Vlan Settings CFINum Default page is Page1. There are 3 pages, Page 1 toVirtual Server Mapping 23 that can be setAdd Virtual Server Add the new Server which you configuredSeen from the WAN side Smtp Well Known TCP/UDP PortsUDP TCP POP3Sntp Settings If the primary server becomes unreachableAlarm Settings Save Settings/Reboot System AuthorityFirmware Update Reset factory defaultSystem Server TFTP, FTP or Http Auto UpdateUpdate via FirmwareBe noted Notify Only Auto Update ProcedureDisplays the next update or check time AutomaticallyIVR Interface for VoIP Gateway Group IVR Action IVR Menu Choice ParametersDial a VoIP Phone call How to make a phone callCall Features Dial a Pstn Phone call V210P/V211Call Waiting Way ConferencingCall Hold Please ensure that the power cable is connected correctly Common problem and solutionsNo power to the ATA ETH light is offAppendix a Glossary ATAProduct Warranty Limitations of WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Product Warranty Contact Information Email support@netcomm.com.au