NetComm V110 manual Notify Only Auto Update Procedure, Be noted, Automatically

Page 59

Automatic Update	Notify only: When newer firmware is available, the VoIP Gateway will only notify you by a
	“BEEP BEEP BEEP” you when you pick up the phone. It will not automatically upgrade.
	Automatic (Scheduling): When there is a newer firmware, it will update the firmware
	automatically.

Firmware File	The file prefix of the firmware
Prefix

Next update time	Displays the next update or check time.

Notify Only Auto Update Procedure:

1.Power on the VoIP Gateway and it will check if there is any newer firmware available on the Server. When there is a newer firmware, it will only notify you by “BEEP BEEP BEEP” after you pick up the phone.

2.Please press #190# and then hang up the phone to unlock the special key on keypad.

3.Please press #160# and then hang up the phone to ask NetComm ATA to update the firmware immediately.

4.It takes around 7 minutes for updating the new firmware.

AUTO UPDATE PROCEDURES:

1.Power on the NetComm ATA and reaches Next update time. It will check if there is any update firmware is newer one on the Server. When there is a newer firmware, it’ll update the firmware automatically. It will take around 7 minutes to update the firmware.

Be noted:

1.If the NetComm ATA is powered off and has passed the Next update time, it will not update the firmware after you power on the NetComm ATA. It’ll only update when the NetComm ATA is power on and reaches Next update time.

2.If you are on the phone and have a conversation to others by VoIP and the Next update time is passing, it will update the firmware immediately after you hang up the phone.

YML881Rev1	�V110,��V2��10P,��V2��11,��V220�� User Guide
www.netcomm.com.au	59

Image 59

Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Minimum System Requirements Package ContentsPort / Button Description ResetGetting to know your NetComm V2xx ATA Ports and ButtonsETH LED IndicatorsPWR SIPDhcp Default SettingsRestoring Factory Defaults V211 and V210P Hardware InstallationV110 V220 V110,V210P,V211,V220 User Guide Easy Setup Utility for Windows Only Software ConfigurationAccessing the web configuration Configuration via a web browserWAN Configuration MAC Static IP ConfigurationOption Description YML881Rev1 Ethernet MAC address of the WAN interface. Optional Dhcp ModeYour Internet Service Provider ISP. Optional User Name PPPoE Client ModeVoIP Configuration Field Description Advanced Configuration VoIP Status StatusSystem Information Network StatusWAN ConfigurationOptions Description VoIP SIP Setting Support DNS SRV RTP Port Base port to receive RTP packets. DefaultAuth Name Use DNS SRVCodec Settings V110,V210P,V211,V220 User Guide URL Phone Book ConfigurationPhone Book Example 2 Position 1, Name ip address 10.32, Number 001, URL Add New PhoneYML881Rev1 IP/ON Phone SettingYML881Rev1 V110,V210P,V211,V220 User Guide DND Always Volume Setting functionTo set the volume for on your handset V211 only is to set the Pstn volume outV110,V210P,V211,V220 User Guide Enter the correct PIN Code 1234, then press # How to Use VoIP to Pstn Call Call in via VoIPHow to Use Pstn to VoIP Call Call in via Pstn CID Type Enable to detect the Caller ID Type Single Caller ID Enable to detect Single Caller IDEnable to detect the Caller ID without time 2,3,4,5,6,7,8,9 Wildcard Drop PrefixDialed V110,V210P,V211,V220 User Guide YML881Rev1 FAX Switch on to enable T.38 fax supportPort Default is Auto Dial Time functionSupport Others Enable Auto Configuration. DefaultoffYML881Rev1 Supports the proprietary implementation DefaultWALKERSUN2 Computer’s MAC that was originally set up for such an ISPOptions Description MAC Clone Ddns 110, V2 10P, V2 11, V220 User Guide CFI Vlan SettingsMapping 23 that can be set Default page is Page1. There are 3 pages, Page 1 toVirtual Server NumSeen from the WAN side Add the new Server which you configuredAdd Virtual Server POP3 Well Known TCP/UDP PortsUDP TCP SmtpIf the primary server becomes unreachable Sntp SettingsAlarm Settings System Authority Save Settings/RebootSystem Reset factory defaultFirmware Update Firmware Auto UpdateUpdate via Server TFTP, FTP or HttpAutomatically Notify Only Auto Update ProcedureDisplays the next update or check time Be notedGroup IVR Action IVR Menu Choice Parameters IVR Interface for VoIP GatewayDial a Pstn Phone call V210P/V211 How to make a phone callCall Features Dial a VoIP Phone callCall Hold Way ConferencingCall Waiting ETH light is off Common problem and solutionsNo power to the ATA Please ensure that the power cable is connected correctlyATA Appendix a GlossaryLimitations of Warranty Product WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Email support@netcomm.com.au Product Warranty Contact Information