NetComm V110 manual Your ADSL2+ connection

Page 67

Did you know your phones will disrupt

your ADSL2+ connection...

Even If You Have Older ADSL Filters?

Due to faster ADSL speeds, an inline ADSL2+ Microfilter stops your ADSL connection being disrupted by telephones connected to the same line. Older filters cannot handle these speeds. A high-quality Microfilter from NetComm will ensure you have a stable broadband Internet connection with no reduction in the quality of your telephone service.

Having one easy to install Microfilter for every telephone type device, including dial up modems and Foxtel, is essential to reducing voice and data service problems and interruptions.

NetComm EM1550 ADSL2+ Microfilters conform to relevant ACA requirements and Telstra specifications and will:

•Help you obtain faster technical support from your ISP

•Minimise unexplained disruption of your ADSL connection

•Work with all current ADSL connection speeds

•Microfilters are also splitters which allow you to connect the line between phone and modem

Grab your NetComm Microfilters today, either:

Visit a retailer closest to you...	Order direct...
Harvey Norman, Officeworks or Harris Technology.	Visit www.netcomm.com.au/ADSL/EM1550.php
	Phone (02) 9424-2055 (Quote Ref No - 1550)
YML881Rev1	�V110,��V2��10P,��V2��11,��V220�� User Guide
www.netcomm.com.au	67

Image 67

Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Minimum System Requirements Package ContentsPort / Button Description ResetGetting to know your NetComm V2xx ATA Ports and ButtonsETH LED IndicatorsPWR SIPRestoring Factory Defaults Default SettingsDhcp V211 and V210P Hardware InstallationV110 V220 V110,V210P,V211,V220 User Guide Easy Setup Utility for Windows Only Software ConfigurationAccessing the web configuration Configuration via a web browserWAN Configuration Option Description Static IP ConfigurationMAC YML881Rev1 Your Internet Service Provider ISP. Optional Dhcp ModeEthernet MAC address of the WAN interface. Optional User Name PPPoE Client ModeVoIP Configuration Field Description Advanced Configuration VoIP Status StatusSystem Information Network StatusWAN ConfigurationOptions Description VoIP SIP Setting Support DNS SRV RTP Port Base port to receive RTP packets. DefaultAuth Name Use DNS SRVCodec Settings V110,V210P,V211,V220 User Guide Phone Book Phone Book ConfigurationURL Example 2 Position 1, Name ip address 10.32, Number 001, URL Add New PhoneYML881Rev1 IP/ON Phone SettingYML881Rev1 V110,V210P,V211,V220 User Guide DND Always Volume Setting functionTo set the volume for on your handset V211 only is to set the Pstn volume outV110,V210P,V211,V220 User Guide How to Use Pstn to VoIP Call Call in via Pstn How to Use VoIP to Pstn Call Call in via VoIPEnter the correct PIN Code 1234, then press # Enable to detect the Caller ID without time Single Caller ID Enable to detect Single Caller IDCID Type Enable to detect the Caller ID Type Dialed Drop Prefix2,3,4,5,6,7,8,9 Wildcard V110,V210P,V211,V220 User Guide YML881Rev1 FAX Switch on to enable T.38 fax supportPort Default is Auto Dial Time functionSupport Others Enable Auto Configuration. DefaultoffYML881Rev1 Supports the proprietary implementation DefaultOptions Description MAC Clone Computer’s MAC that was originally set up for such an ISPWALKERSUN2 Ddns 110, V2 10P, V2 11, V220 User Guide CFI Vlan SettingsMapping 23 that can be set Default page is Page1. There are 3 pages, Page 1 toVirtual Server NumAdd Virtual Server Add the new Server which you configuredSeen from the WAN side POP3 Well Known TCP/UDP PortsUDP TCP SmtpIf the primary server becomes unreachable Sntp SettingsAlarm Settings System Authority Save Settings/RebootFirmware Update Reset factory defaultSystem Firmware Auto UpdateUpdate via Server TFTP, FTP or HttpAutomatically Notify Only Auto Update ProcedureDisplays the next update or check time Be notedGroup IVR Action IVR Menu Choice Parameters IVR Interface for VoIP GatewayDial a Pstn Phone call V210P/V211 How to make a phone callCall Features Dial a VoIP Phone callCall Waiting Way ConferencingCall Hold ETH light is off Common problem and solutionsNo power to the ATA Please ensure that the power cable is connected correctlyATA Appendix a GlossaryLimitations of Warranty Product WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Email support@netcomm.com.au Product Warranty Contact Information