NetComm V110 manual Field Description

Page 19

Field	Description

Active	If set to on, the NetComm ATA will attempt to register with your VoIP service provider
	using this account.

SIP Proxy Domain	The SIP Proxy Domain is specified by your VSP.

Proxy Server	The host name of IP address of the SIP server. The proxy server is responsible for
	forwarding requests received from the NetComm ATA to your VoIP service provider. The
	Proxy Server is specified by your VoIP service provider.

Outbound Proxy	The host name of IP address of the Outbound Proxy server. The Outbound proxy server
	is responsible for forwarding requests received from the NetComm ATA to your VoIP
	service provider. The Proxy Server is specified by your VoIP service provider.

Display Name	The name or number the called party sees when you call them.

User Name	Your VoIP number. This number is assigned by your VoIP service provider.

Auth. Name	The authentication username assigned by your VoIP service provider. This can be
	different to your VoIP number.

Auth. Password	The authentication password provided by your VoIP service provider.

Status	Indicates if the NetComm ATA is registered to your VSP. If “Registered” is shown, you
	can make and receive calls via your VoIP service provider. If the NetComm ATA reports
	“not registered”, check the SIP Service Provider settings above and try again.

SIP Expiry Time	This setting specifies a recommendation to the SIP server on the re-registration interval.
	Increasing this time will send less registration traffic, but can cause other issues.

4.Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings.

5.The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.

6.Once the device has rebooted, check if the SIP LED is illuminated to indicate successful registration with your VoIP Service Provider. If not, please check your settings.

YML881Rev1	�V110,��V2��10P,��V2��11,��V220�� User Guide
www.netcomm.com.au	19

Image 19

Contents User Guide Page Welcome to the Wonderful World of VoIP VoIP ATA Features Minimum System Requirements Package ContentsPort / Button Description ResetGetting to know your NetComm V2xx ATA Ports and ButtonsETH LED IndicatorsPWR SIPRestoring Factory Defaults Default SettingsDhcp V211 and V210P Hardware InstallationV110 V220 V110,V210P,V211,V220 User Guide Easy Setup Utility for Windows Only Software ConfigurationAccessing the web configuration Configuration via a web browserWAN Configuration Option Description Static IP ConfigurationMAC YML881Rev1 Your Internet Service Provider ISP. Optional Dhcp ModeEthernet MAC address of the WAN interface. Optional User Name PPPoE Client ModeVoIP Configuration Field Description Advanced Configuration VoIP Status StatusSystem Information Network StatusWAN ConfigurationOptions Description VoIP SIP Setting Support DNS SRV RTP Port Base port to receive RTP packets. DefaultAuth Name Use DNS SRVCodec Settings V110,V210P,V211,V220 User Guide Phone Book Phone Book ConfigurationURL Example 2 Position 1, Name ip address 10.32, Number 001, URL Add New PhoneYML881Rev1 IP/ON Phone SettingYML881Rev1 V110,V210P,V211,V220 User Guide DND Always Volume Setting functionTo set the volume for on your handset V211 only is to set the Pstn volume outV110,V210P,V211,V220 User Guide How to Use Pstn to VoIP Call Call in via Pstn How to Use VoIP to Pstn Call Call in via VoIPEnter the correct PIN Code 1234, then press # Enable to detect the Caller ID without time Single Caller ID Enable to detect Single Caller IDCID Type Enable to detect the Caller ID Type Dialed Drop Prefix2,3,4,5,6,7,8,9 Wildcard V110,V210P,V211,V220 User Guide YML881Rev1 FAX Switch on to enable T.38 fax supportPort Default is Auto Dial Time functionSupport Others Enable Auto Configuration. DefaultoffYML881Rev1 Supports the proprietary implementation DefaultOptions Description MAC Clone Computer’s MAC that was originally set up for such an ISPWALKERSUN2 Ddns 110, V2 10P, V2 11, V220 User Guide CFI Vlan SettingsMapping 23 that can be set Default page is Page1. There are 3 pages, Page 1 toVirtual Server NumAdd Virtual Server Add the new Server which you configuredSeen from the WAN side POP3 Well Known TCP/UDP PortsUDP TCP SmtpIf the primary server becomes unreachable Sntp SettingsAlarm Settings System Authority Save Settings/RebootFirmware Update Reset factory defaultSystem Firmware Auto UpdateUpdate via Server TFTP, FTP or HttpAutomatically Notify Only Auto Update ProcedureDisplays the next update or check time Be notedGroup IVR Action IVR Menu Choice Parameters IVR Interface for VoIP GatewayDial a Pstn Phone call V210P/V211 How to make a phone callCall Features Dial a VoIP Phone callCall Waiting Way ConferencingCall Hold ETH light is off Common problem and solutionsNo power to the ATA Please ensure that the power cable is connected correctlyATA Appendix a GlossaryLimitations of Warranty Product WarrantyV110,V210P,V211,V220 User Guide Your ADSL2+ connection Email support@netcomm.com.au Product Warranty Contact Information