Multi-Tech Systems MT2834BR, MT2834BLR manual Command Values Default

		Chapter 4 - Commands
VALUES:	n = 1 thru 3
DEFAULT:	Read Only Command
DESCRIPTION:	$H1 brings up Help Screen #1.
	$H2 brings up Help Screen #2.
	$H3 brings up Help Screen #3.
COMMAND:	In
VALUES:	n = 0,1or 2
DEFAULT:	Read Only Command
DESCRIPTION	I0 requests modem ID #.
	I1 requests firmware revision #.
	I2 for MTS internal use.
COMMAND:	I9
VALUES:	N/A
DEFAULT:	Read Only Command
DESCRIPTION:	The I9 command is a query to display this modem's
	characteristics when operating within Windows 95. Entering
	ATI9<cr> invokes BR 28800 FAX CT on your video
	monitor.	(The response to the query reveals that your
	modem is a BR, 28.8K, FAX and Class Two capable
	device.)
COMMAND:	L
VALUES:	5, 6, 7, 8, 9, 10 and 11
DEFAULT:	Read Only Command
DESCRIPTION:	Lists all stored telephone numbers in memory.
	L5 lists all current operating parameters.
	L6 lists all current S-Register values.
	L7 lists additional parameters.
	L8 lists current on-line diagnostics.
	L9 displays Signal Strength Information.
	L10 displays Signal to Noise Ratio Information.
	L11 displays Noise Information.
COMMAND:	#Ln
VALUES:	n = 0 thru 3
DEFAULT:	#L0
DESCRIPTION:	#L0 selects modems negotiate V.42 Mode.
	#L1 selects MNP on and LAP-M off.
	#L2 selects LAP-M on and MNP off.
	#L3 selects no detection phase; go directly to LAP-M
	mode.
COMMAND:	$MBn

37