Multi-Tech Systems MT2834BLR, MT2834BR manual Reads value of S-Register r and displays value

	Chapter 4 - Commands
VALUES:	r = 0-11, 13, 15-17, 24-26, 29, 30, 32, 34, 36, 37, 48
DEFAULT:	n/a
DESCRIPTION:	Reads value of S-Register “r” and displays value in 3-
	digit decimal format.
COMMAND:	$SBn
VALUES:	n = speed
DEFAULT:	$SB115200 bps
DESCRIPTION:	$SB300 selects 300 bps at serial port.
	$SB1200 selects 1200 bps at serial port.
	$SB2400 selects 2400 bps at serial port.
	$SB4800 selects 4800 bps at serial port.
	$SB9600 selects 9600 bps at serial port.
	$SB19200 selects 19200 bps at serial port.
	$SB38400 selects 38400 bps at serial port.
	$SB57600 selects 57600 bps at serial port.
	$SB115200 selects 115200 bps at serial port.
COMMAND:	$SPn
VALUES:	n = 0 or 1
DEFAULT:	$SP0
DESCRIPTION:	$SP0 disables UUCP spoofing.
	$SP1enables UUCP spoofing.
COMMAND:	&SFn
VALUES:	n = 0 or 1
DEFAULT:	&SF0
DESCRIPTION:	&SF0 selects DSR follows CD.
	&SF1 selects DSR independent.
COMMAND:	&Sn
VALUES:	n = 0, 1 or 2
DEFAULT:	&S1
DESCRIPTION:	&S0 forces Data Set Ready On.
	&S1 lets Data Set Ready act normally.
	&S2 Data Set Ready drop is regulated by S24 on
	disconnect.
COMMAND:	T
VALUES:	n/a
DEFAULT:	Tone Dial
DESCRIPTION:	Modem will tone-dial numbers following the T.
COMMAND:	&Tn

40