Multi-Tech Systems MT2834BLR, MT2834BR manual = 0, 1, 2 or

	Chapter 4 - Commands
VALUES:	n = 0, 1, 2 or 4
DEFAULT:	&C1
DESCRIPTION:	&C0 forces Carrier Detect on.
	&C1 lets Carrier Detect act normally.
	&C2 lets Carrier Detect drop S24 time on disconnect.
	&C4 resets modem when Carrier Detect drops.
COMMAND:	&CDn
VALUES:	n = 0 or 1
DEFAULT:	&CD0
DESCRIPTION:	&CD0 execute cleardown on disconnect.
	&CD1 do not execute cleardown on disconnect.
COMMAND:	Ds
VALUES:	s = phone #
DEFAULT:	n/a
DESCRIPTION:	Dial a telephone number “s”, where s may include up to 60
	digits or T, P, R, comma and ; characters.
COMMAND:	DsNd
VALUES:	s = phone # and d = 0 thru 9
DEFAULT:	n/a
DESCRIPTION:	Store telephone number. To store, enter phone number "s",
	followed by N, then Directory Number "d".
COMMAND:	&Dn
VALUES:	n = 0 thru 3
DEFAULT:	&D2
DESCRIPTION:	&D0 means DTR is ignored
	&D1 means modem returns to command mode.
	&D2 lets modem react to DTR normally.
	&D3 resets the modem to default parameters.
COMMAND:	$Dn
VALUES:	n = 0 or 1
DEFAULT:	$D0
DESCRIPTION:	$D0 disables DTR Dialing.
	$D1 enables DTR Dialing.
COMMAND:	%DF
VALUES:	n = 0 or 1
DEFAULT:	%DF0
DESCRIPTION:	%DF0 selects V.34 Line Probe Data in Graph Format.
	%DF1 selects V.34 Line Probe Data in Table Format.
COMMAND:	%DP

34