Multi-Tech Systems MT5634ZPX-PCI owner manual Appendix B Technical Specifications

Page 76

Owner’s Manual

Appendix B: Technical Specifications

Trade Name

MultiModemZPX-PCI

Model Numbers

MT5634ZPX-PCI

Client-to-Server

 

Data Rates

V.90/K56flex* speeds when accessing an ISP-

 

type V.90/K56flex server (actual speed

 

depend on server capabilities and line

 

conditions)

Client-to-Client

 

Data Rates

Enhanced V.34 speeds to 33,600 plus 31,200,

 

28,800, 26,400, 24,000, 21,600, 19,200,

 

16,800, 14,400, 12,000, 9600, 7200, 4800,

 

2400, 1200, 0-300 bps

Fax Rates

14,400, 12,000, 9600, 7200, 4800, 2400, and

 

300 bps

Data Format

Serial, binary, asynchronous

Data Compatibility

V.90/K56flex, ITU V.34 extended, V.34, ITU

 

V.32bis, V.32, V.22bis, V.21, V.22, V.23;

 

Bell 212 and 103; ITU V.42, V.42bis

Fax Compatibility

ITU Group 3, T.4, T.30, V.21, V.27ter, V.29,

 

V.17, and TIA/EIA 578 Class 1, Class 2

Voice Compatibility

TIA/EIA IS-101, H.324 (V.8, V.25ter), V.80

Voice Mode Sampling

Up to 44.100 kHz (down-sampled to 11.025

 

kHz)

Error Correction

ITU V.42 (LAP-M and MNP Classes 2–4)

Data Compression

ITU V.42bis (4:1 compression) and MNP 5

 

(2:1 compression)

Speed Detection

Automatic speed detection and switching

 

between available speeds

*Although V.90/K56flex technology is capable of downloads of up to 56 Kbps, FCC regulations currently restrict ISP modems to downloads of 53 Kbps.

76

MT5634ZPX-PCI

Image 76
Contents Model MT5634ZPX-PCI MT5634ZPX -PCI Record of RevisionsContents Introduction Initial Checklist Common Problems Introduction Limited WarrantyData is being lost Technical SupportIntroduction and Description MT5634ZPX-PCI Features Introduction and DescriptionPeripiheral Component Interconnect PCI FaxSupport/Functions Downstream RatesUpstream Data Rates Optional V.8bis SequenceWhat is in Your Modem Package? Digital Loss and Robbed-bit Signaling Auto AdaptHow to Use This Manual AppendixTypographic Conventions You type thisInstallation Introduction What You’ll NeedInstallation Overview Safety WarningsInstallation Configuring the MultiModem ZPX-PCI Windows 95 Plug and PlayInstalling the MultiModemZPX-PCI Plug the telephone’s line cable into External ConnectionsWith the modem, insert the microphone Installing Drivers Verifying ConfigurationPort COM Interrupt Address Speed Is Your MultiModemZPX-PCI Ready for Use? Select Start, Settings, and then Control PanelTo Remove Previous Modem from Windows Operating Your MultiModemZPX-PCI Simple OperationTesting Data Functions Software ConfigurationSelect Start, Programs, Accessories, and then HyperTerminal Connect dialog box, click Dialing Properties Click Start, Programs, Accessories, and then WordPad Testing FAX FunctionsMultiModemZPX-PCI’s fax capabilities Testing Voice Function Click Start, Programs, Accessories, and then HyperTerminalMultiModemZPX-PCI’s Speakerphone Test AT+FCLASS=8 AT+VLS=7Configuring Communications Software Installation Remote Configuration Basic ProcedureSetup Changing the Setup PasswordPKUNZIP.EXE AT Commands, S-Registers, and Result Codes AT Commands AT Commands, Result Codes, and S-Registers Communication Standard SettingCarrier Control DialEcho Command Mode Characters DS=n Dial Stored Telephone NumberEcho Online Data Characters Hook ControlMonitor Speaker Volume Monitor Speaker ModeReturn Online to Data Mode Modulation HandshakeSr=n Set Register Value Sr? Read Register ValueResult Code Format Result Code SelectionModem Reset Long Space DisconnectAuto Retrain Data Carrier Detect DCD ControlFn Load Factory Default Settings Communications ModeAsynchronous Communications Mode 22bis Guard Tone ControlSelf-Test Commands View Current ConfigurationStore Current Configuration Select Stored Configuration for Hard Reset\Nn Error Correction Mode Selection \Gn Modem Port Flow Control\Jn Data Buffer Control \Kn Set Break Control\T n Inactivity Timer \V n Protocol Result Code\X n XON/XOFF Pass-Through Data Calling ToneAllowed value Enable Synchronous Buffered ModeSpeaker Codec Loopback Registers Decimal Disables, 1-255 enables Modulation 50-150Tones Minute 255Connect. Where K56flex provided =V.90/56Kflex disabledData mode = disable 1 = enable1-4 sets the value to S36=5,7 LAPM, MNP, or Async MNP or AsyncSets one of three 56K operating Result Codes Connected at 46000 bps Connected at 48000 bpsConnected at 50000 bps Connected at 52000 bpsTroubleshooting Initial Checklist Common Problems TroubleshootingMT5634ZPX-PCI Modem dials but cannot make a connection Modem disconnects while online Modem cannot connect when answering Data is being lost Warranty, Service, and Tech Support/BBS Limited Warranty Online Warranty Registration Warranty, Service, and Tech SupportTechnical Support Recording Modem InformationService Multi-Tech Systems, Inc Woodale Drive Mounds View, MNMulti-Tech BBS To log on to the Multi-Tech BBSTo Download a file If you know the file nameIf you don’t know the file name About CompuServe About the Multi-Tech Fax-Back ServiceAbout the Internet Appendix Appendix a Regulatory Compliance FCC Regulations for Telephone Line InterconnectionAppendix Fax Branding StatementMulti-Tech Systems, Inc Canadian Limitations Notice Appendix Product Safety Compliance +12 VDC, -12 VDC, +5 VDCFigure A-1. Creepage and Clearance Distances EMC, Safety and Terminal Directive Compliance European Low Voltage DirectiveNew Zealand Modem Warning Notice Appendix B Technical Specifications 14,400, 12,000, 9600, 7200, 4800, 2400,90/K56flex, ITU V.34 extended, V.34, ITU ITU Group 3, T.4, T.30, V.21, V.27terAppendix Fax Carrier Frequencies Hz mark, 1850 Hz space for TransmitConnectors Appendix C Ascii Conversion Chart Code HEX DECAppendix D FLASHWINFlash Upgrade IntroductionMT5634ZPX-PCI Index BBS Enable/disable V25 data calling tone S35 IndexAuto Retrain DataFax-back service , 66 FCC Regulations , 68-81 firmware Fall-forward , 7 fallback , 7, 37 faxTones dialing MT5634ZPX-PCI