CMG-DCM
DNS setup
net.dns.domain : The name of the domain containing the module. For example, a DCM at myinst.bignet.org would have its domain set to bignet.org.
The rest of the settings on this page determine how the DCM determines the addresses of other hosts on the network from their host names.
net.dns.search : If the DCM encounters an unqualified hostname in any of its configuration settings, or in a command, it will look for that name in each of the domains specified here in turn. You should give the domains to search in their correct order, separated by commas. The DCM's own domain (as given in the net.dns.domain setting) will always be searched first, so you need not specify it here.
net.dns.server.0 : The IP address of the primary nameserver used to resolve host names. If you are using dhcp/bootp, the DNS service is negotiated automatically, and so this setting may be ignored.
net.dns.server.1 : The IP address of the secondary nameserver. Again, you may be able to ignore this setting if you are using dhcp/bootp.
48 | Issue A |