
7.2.3 Configuration of the JBUS/MODBUS communication parameters
Connect the RS232 link to a terminal (Microsoft Hyper
◗Use the cord supplied with the card.
◗Connect the card to a computer equipped with a Hyper terminal type emulator. The serial link must be set at 9600
baud, | 8 bits, no parity, 1 stop bit, and without flow control. |
◗Check that UPS power is on.
◗Enter the MGEUPS or mgeups password (not modifiable).
ENERGIZE YOUR ENTERPRISE |
|
|
Network Management Card – User Manual | 34003991EN/DA | Page 86/120 |