◗The next menu appears:
MGE UPS SYSTEMS
NETWORK MANAGEMENT CARD
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
5 : Jbus configuration
6 : Sensor configuration
0 : Exit
◗Type 5 and return to display the JBUS configuration menu.
◗
◗The next menu appears:
Jbus settings
1 : Display Jbus settings
2 : Modify Jbus settings
3 : Display Jbus diagnostics
4 : Reset Jbus diagnostics
5 : Return to Jbus Default Configuration
6 : Display Jbus frames
0 : Exit
7.2.3.1 Choice 1: Display Jbus settings
Enables reading of the card's Jbus settings
Jbus configuration : Slave number : 7 Speed : 9600 bds Data : 8 bits stop bit : 1 Parity : None
7.2.3.2 Choice 2: Modify Jbus settings
Enables the modification of Jbus settings.
ENERGIZE YOUR ENTERPRISE |
|
|
Network Management Card – User Manual | 34003991EN/DA | Page 87/120 |