Lightwave Communications 3200 user manual Log /Enabledisable

1 will refer to the netterm subsystem and

2 will refer to the network subsystem on the card F1 - G1 switch cards (do not require updating)

H1 - O1 device cards

P1 - control card

LINESPERPAGE [n]	- Display/set	number of lines before pause
	(n can be 0	to 99, 0 disables)
LISTCARDS	- Show list of installed cards
LISTDEVICES	- Show list of device names
LISTUSERS [user id/ALL]	- Display list of users
LOG [/ENABLEDISABLE]
	- Enable/disable system events
	and set destination of event info
LOGOUT,LOGOFF	- Logout
MODEM [/DEFAULT]	- Display/set	modem init string
	/DEFAULT - set init string to default
MODEMTIMEOUT [t]	- Display/set	timeout for modem calls
	(t can be 0	to 30 minutes, 0 disables)
NETWORK [/ALLslot letter]	- Set network	parameters ('B' - 'E')
POWERSTATUS	- Show status	of power supplies
PROMPT [/CLEAR/DEFAULT]	- Set/clear system prompt for logged-out state.
	or set prompt to factory default.
MODEM [/DEFAULT]	- Display/set	modem init string
	/DEFAULT - set init string to default
MODEMTIMEOUT [t]	- Display/set	timeout for modem calls
	(t can be 0	to 30 minutes, 0 disables)
NETWORK [/ALLslot letter]	- Set network	parameters ('B' - 'E')
POWERSTATUS	- Show status	of power supplies
PROMPT [/CLEAR/DEFAULT]	- Set/clear system prompt for logged-out state.
	or set prompt to factory default.
More
RESTORE	- Restore internal database
	(upload ASCII file)
TELNETTIMEOUT [t]	- Display/set	timeout for telnet sessions
	(t can be 0	to 30 minutes, 0 disables)
TERMINALS	- Display terminal settings
TERMINALS [/ALLn] (n can be 1 to 17) - change settings
tftp [/B/C/D/E] [get] host:file - Modified tftp command, used to
	transfer new updates to this box
	(/B use network card B, /C use card C, etc.)
tftpkill	- kill active	tftp session.
TIMEOUT [t]	- Display/set	timeout on sys admin login
	(t can be 0	to 9 minutes, 0 disables)
VERSION [/ALLslot letter]	- Report software version information
	(/ALL - return version for all cards)

sys admin>>

A listing of abbreviations for the administrator commands is also available when connected to the administrator port. The ABBREVIATIONS command is only available when logged in.

sys admin>ABBREVIATIONS

ConsoleServer3200 Sys Admin Command Abreviations List

ABBREVIATIONS	- A
ADDUSER	- ADDU
	AU
BACKUP	- (no abbreviation)
BREAK	- (no abbreviation)
CHANGEPSWD	- PASSWD
	PSWD
CONNECTIONS	- C
DELETEUSER	- DELETEU
DEVICES	- DEV
EDITUSER	- EDITU
	EU
FORCELOGOUT	- (no abbreviation)
HELP	- H, ?

20