6.1.2 Logging In, Network Connection
UNIX_MACHINE# telnet 172.16.1.200 5000
Connecting to 172.16.1.200 port 5000...
Escape sequence is ^]
Welcome to the ConsoleServer3200 SysAdmin
LCI3200>>login
Please enter password: ****
sys admin>>
To log in on the ConsoleServer through a network connection, the network interface for the ConsoleServer first must be configured through the serial terminal (see section 6.5). Once the network interface is configured and functioning, telnet to port 5000 of the IP address assigned to the ConsoleServer. The ConsoleServer will display a welcome message and the LCI3200>> prompt. At the prompt, type LOGIN. The system will only prompt for the password. At the Please enter password: prompt, enter the administration password. The default administrator password is PASS (see section
6.1.5to change the administrator password). The ConsoleServer will only echo stars when the password is entered. If the password is correct, the prompt will change to sys admin>>.
6.1.3 Logging Out
To log out from an administration session, enter the command LOGOUT or LOGOFF. If logging out from a network session, the ConsoleServer will disconnect the telnet session. If logging out from a direct serial session, the ConsoleServer will return to the LCI3200>> prompt.
6.1.4 System Help
To access the help screens, type <F1> H, ?, or HELP to display the help page. There are two different help screens to reflect the commands available if the administrator is logged in or logged out.
18