sys admin>>terminal 1 |
|
|
Enter accepts present value |
|
|
T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 9600> | |
T1: 0=1, 1=2 | STOP BITS: 1> | |
T1: 0=None, 1=Odd, 2=Even | PARITY: None> | |
T1: 0=8, 1=7, 2=6 | DATA BITS: 8> | |
T1: 0=DCE, 1=DTE | EQUIP PORT TYPE: DCE> | |
T1: 0=XON/OFF, 2=RTS/CTS | FLOW CONTROL: XON/XOFF> | |
Card installed, settings updated |
|
|
sys admin>>
Device port location reference and device name template:
H I J K L M N O
A list of device port names and their corresponding port number may be displayed by using the LISTDEVICES command.
6.4Terminals Command
The sys admin defines terminal port parameters using the TERMINALS command in a manner similar to the DEVICES command. If the command is entered by itself, the terminal settings will display. If the terminal port number is specified after the command, then the settings for that terminal port may be altered. Programmable elements include: device name, baud rate, stop bits, parity, data bits, DCE/DTE, and flow control as in the example below.
27