LevelOne FPS-3001TXU, FPS-2112, FPS-3002USB manual LAN Installation, Procedure

Page 10

Chapter 2

2

LAN Installation

This chapter describes how to install the LevelOne Printer Server in your Local Area Network.

Procedure

1. Find the Default LevelOne Printer Server Name

The Default Server Name is shown on a sticker on the base of the device. It consists of 8 letters and/or digits.

Record this name, it may be needed during configuration.

2. Connect the Printer

Connect the printer or plotter to the LevelOne Printer Server's printer port(s), as appropriate:

FPS-3001TXU- Plug the FPS-3001TXU LevelOne Printer Server directly into the parallel port on the printer.

FPS-3002USB- Use the USB cable supplied with your printer to connect the printer to the FPS-3002USB LevelOne Printer Server's USB port

FPS-2112 - Use the USB printer cable supplied with your printer to connect the printer to the FPS-2112 LevelOne Printer Server's USB port. Use a standard parallel port cable to connect a printer to the parallel port.

Leave the LevelOne Printer Server powered OFF while connecting it to the Printer(s) and the LAN.

3. Connect the Network Cable

Use a standard 100BaseT LAN cable to connect the LevelOne Printer Server to your LAN.

4. Power Up and Check

Plug in the power adapter cable, power up and check the LEDs.

The Power LED should be On.

The Status LED should flash, then turn Off. However, on the FPS-3002USB, the Status (Red) LED will remain on if the FPS-3002USB LevelOne Printer Server can't connect to the USB printer.

On the FPS-3001TXU, one of the network LEDs (10 or 100) should be On.

On the FPS-2112, The Red Error LED should flash, then turn Off. When the Error LED goes off and the ACT LED remains lit or flashes, the FPS-2112 LevelOne Printer Server is ready. The LAN LED should be ON.

Use only the Power Supply unit provided with the

LevelOne Printer Server.

- 7 -

Image 10
Contents Level One Print Servers Table of Contents Appendix C Unix Systems Appendix a SpecificationsAppendix B Windows Server Configuration Appendix D NetWareFeatures IntroductionSafety Instructions Package ContentsModels LED IndicatorsPower Green Status Orange Description FPS-3001TXU 100BaseT Direct AttachPower Green Status Red Description FPS-3002USBStatus Description FPS-2112Green Red To restore the factory default settings Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USBTo generate a Diagnostic print out LAN Installation ProcedureProcedure ConfigurationUsing the Windows Wizard OverviewIf the desired LevelOne Printer Server is not listed LevelOne Printer Server ScreenPrinting Methods Client PC ConfigurationWhich printing method should I use? Network Configuration Checking your Network Protocols WindowsWindows 2000/XP Setup Windows Peer-to-peer PrintingChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled Windows 9x/ME Setup PTP Printer Port SetupPrint Port Setup Peer-to-peer Printing If your LevelOne Printer Server is not listedConfigure Printer Port ManagementBanner Advanced Port OptionsPort Retry IntervalWindows SMB Printing Network NeighborhoodCapture Settings Windows 98/ME Printing from MS-DOS ProgramsCapture Settings Windows 2000/XP Login as Administrator Open the command prompt windowWhen prompted for Network Path or Queue Name Windows with Server-based Print QueuesMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsLPR printing Setup Macintosh OSRequirements BiAdmin Management UtilityInstallation OperationIcons Device Status Device ListPrinter Status Wizard ConfigurationUpgrade RefreshMenus ConfigurationDiagnostics menu Main MenuSystem Tab System ScreenTCP/IP Tab TCP/IP ScreenAppleTalk Tab AppleTalk ScreenNetBEUI Tab NetBEUI ScreenInternet Printing Tab Internet Printing ScreenPhysical Port Port TabLogical Port NetWare Tab Web-Based Management PreparationConfiguration Screens Connecting to the LevelOne Printer ServerAppleTalk Domain Name Abort Job if ErrorNetBEUI Response TimeConnection NetWare GeneralSnmp Simple Network Management Protocol Management StationsServer Status Configure ServerOther Screens Printer PortsLogical Printers Internet PrintingIPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing using IPPCLIENT.EXE IPP Client Setup Windows 98/MEInstalling from the CD-ROM IPP Client ConfigurationChanging the IPP Port Settings Select Printer for IPP PortIPP Client Setup Windows 2000/XP Port 2 if existsUsing IPP Printers Mail Server Internet Mail PrintingSystem Requirements Internet LevelOne Printer ServerInternet Mail Printing Configuration Port Name Installation User SoftwareUser Software Remote PrinterUsing the new Port Checking the Printer DriverPrinting through the Internet InterNet Printing ProgressProblem No All the LevelOne Printer Servers LEDs are off TroubleshootingHardware & LAN Problems If using 10/100BaseT, check the HubProblem No My file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My EPS file doesnt print with the correct fontsLevel One Printer Servers To remove an existing printer port installation Windows PrintingLevel One Printer Servers Problem No Problem No My old printer cannot print or prints garbage Then select File Properties DetailsUnix Troubleshooting LevelOne Printer Server device is not recognizedFCC Statement SpecificationsEnvironmental Specifications CE StandardsParallel Port Pin Assignments ACKFPS-3002USB FPS-3002USBFPS-2112 FPS-2112Specifications Feature Table3001TXU 3002USB Adding TCP/IP Printing Support Windows Server ConfigurationWindows NT4.0 Server Adding a TCP/IP Remote PrinterWindows 2000/2003 Server Windows 2000 MessageOther LevelOne Printer Server Configuration LevelOne Printer Server IP Address ConfigurationUnix Systems LPD on IBM AIX LPD PrintingField Entry LPD on System ProcedureAction Sample Command Adding Remote PrintersLPD on Linux Field DataLPD on BSD Printing using LPD NetWare NetWareCreating an Ndps Manager Object Creating an Ndps Printer Agent At the Identification page, click the Printer Agent ListConfigure Port Handler NetWare 3 Operation ModeFrame Type Device Name NetWare Print Server ModeNetWare Remote Printer Mode Print ServerUsing BiAdmin with Client PreparationPrint Server Mode Bindery ButtonsQuickset Button Bindery NetWare Configuration Button BinderyIf you have multiple File Servers Printer If you have a single File ServerFile Server OperatorPrinter Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NameNetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS Mode

FPS-2112, FPS-3002USB, FPS-3001TXU specifications

The LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 are a series of advanced network video surveillance solutions designed to meet the growing demands of modern security applications. They incorporate cutting-edge technologies and features that cater to various surveillance needs, from small businesses to larger enterprises.

The FPS-3001TXU is a high-performance video server that offers reliable streaming capabilities for IP cameras. It supports dual-channel video encoding, allowing simultaneous transmission of two video streams with distinct resolutions and frame rates. This flexibility is particularly useful in environments requiring different levels of detail. The device is equipped with advanced H.264 compression technology, which reduces bandwidth usage while maintaining high video quality. Additionally, the FPS-3001TXU supports Power over Ethernet (PoE), simplifying installation by delivering both power and data via a single cable.

The FPS-3002USB takes versatility a step further by integrating USB connectivity for peripheral devices. This feature allows users to connect external storage for footage backup or additional input devices to enhance the overall security system functionality. The FPS-3002USB also boasts multiple video resolution options, ensuring compatibility with various camera systems. Its robust user interface makes configurations and management straightforward, catering to users with varying levels of technical expertise. The device supports secure data transmission through encryption, which is essential for protecting sensitive information.

Lastly, the FPS-2112 is designed for extensive monitoring applications and supports multiple video channels. This device excels in environments requiring comprehensive coverage, such as retail stores or corporate buildings. The FPS-2112 features state-of-the-art motion detection capabilities, enabling users to receive timely alerts during suspicious activities. The integration with cloud services allows for remote monitoring and management, providing users with access to their surveillance feeds from anywhere.

In summary, the LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 stand out in the realm of network video surveillance. With their advanced encoding technologies, flexible installation options, and user-friendly interfaces, these devices cater to diverse security requirements and enhance the overall efficacy of surveillance systems. Whether deployed in small setups or large-scale installations, these models deliver a robust and reliable solution for modern surveillance challenges.