LevelOne FPS-3002USB, FPS-2112, FPS-3001TXU manual Level One Printer Servers

Level One Printer Servers

	• Install the Apple LaserWriter 7 driver. You are having trouble
	printing with the Apple LaserWriter 8 driver.
Problem No. 8	Why do I have trouble printing with the LaserWriter 8?
Solution No. 8	Your application software may not be compatible with the LaserWriter
	8 driver or your system may not meet the requirements of the
	LaserWriter 8 driver. Use the Apple LaserWriter 7 driver instead.
Problem No. 9	The colors on my printed output do not match the colors on my
	computer screen.
Solution No. 9	When the printer receives a color file, it tries to match the printed
	output color to the screen color. Sometimes the printer cannot match up
	the colors as closely as wanted. To alleviate this problem, perform the
	following steps:
	• Choose "Calibrated Color/Grayscale" in the Print pop-up menu in
	the Print Options dialog box. The printer will make adjustments
	to match the colors.
	• Check your monitor to make sure all settings (for example,
	brightness) are adjusted correctly.
Problem No. 10	When I send a print job, I get a PostScript Command error or no
	print out.
Solution No. 10	Check the communication protocols. The computer, LevelOne
	Printer Server and printer must all be configured to the same
	communication protocol.(either Binary or ASCII).
	To configure your system:
	1. Choose which protocol you are going to use. You should check
	your printer; it may not give you a choice.
	2. Set your printer to the correct protocol.
	3. Use the computer's Print submenu to configure your computer to
	use the protocol you have chosen.
	4. Configure the LevelOne Printer Server to use the same protocol as
	the printer and computer.

- 56 -