LevelOne FPS-2112, FPS-3001TXU, FPS-3002USB manual Using IPP Printers

Page 51

Level One Printer Servers

5.Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server.

6.Click "Next", and complete the Wizard. The IPP printer is now ready for use.

Using IPP Printers

The IPP Printer can be selected and used like any other Windows printer. If the IPP Server is not on your network, your Internet connection needs to be active.

If using the supplied IPP Client software, you can use the Query IPP Printer program installed with Add IPP Port to check the availability of the remote IPP Server.

An IPP Server may be unavailable for any of the following reasons:

•It is powered off.

•A printer problem has caused the IPP Server to cease responding, and a restart (reboot) is required.

•The Server's IP Address has changed.

•The Internet connection for the IPP Server is down.

•Network congestion causes the connection attempt to time out.

If using the supplied IPP Client software, there are 2 settings - Retry Interval and Retry Count - which can be adjusted if you have problems connecting to the IPP Server.

See the previous section Changing the IPP Port Settings for details.

- 48 -

Image 51

Contents Level One Print Servers Table of Contents Appendix D NetWare Appendix a SpecificationsAppendix B Windows Server Configuration Appendix C Unix SystemsIntroduction FeaturesPackage Contents Safety InstructionsFPS-3001TXU 100BaseT Direct Attach LED IndicatorsPower Green Status Orange Description ModelsFPS-3002USB Power Green Status Red DescriptionFPS-2112 Status DescriptionGreen Red Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USB To restore the factory default settingsTo generate a Diagnostic print out Procedure LAN InstallationOverview ConfigurationUsing the Windows Wizard ProcedureLevelOne Printer Server Screen If the desired LevelOne Printer Server is not listedClient PC Configuration Printing MethodsWhich printing method should I use? Checking your Network Protocols Windows Network ConfigurationWindows Peer-to-peer Printing Windows 2000/XP SetupChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled PTP Printer Port Setup Windows 9x/ME SetupIf your LevelOne Printer Server is not listed Print Port Setup Peer-to-peer PrintingManagement Configure Printer PortRetry Interval Advanced Port OptionsPort BannerNetwork Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Capture Settings Windows 98/MELogin as Administrator Open the command prompt window Capture Settings Windows 2000/XPWindows with Server-based Print Queues When prompted for Network Path or Queue NameSoftware Requirements AppleTalk SetupAdvanced Setup and Management Macintosh AppleTalkMacintosh OS LPR printing SetupOperation BiAdmin Management UtilityInstallation RequirementsDevice List Icons Device StatusPrinter Status Refresh ConfigurationUpgrade WizardMain Menu ConfigurationDiagnostics menu MenusSystem Screen System TabTCP/IP Screen TCP/IP TabAppleTalk Screen AppleTalk TabNetBEUI Screen NetBEUI TabInternet Printing Screen Internet Printing TabPort Tab Physical PortLogical Port NetWare Tab Preparation Web-Based ManagementConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk Response Time Abort Job if ErrorNetBEUI Domain NameConnection General NetWareManagement Stations Snmp Simple Network Management ProtocolPrinter Ports Configure ServerOther Screens Server StatusInternet Printing Logical PrintersSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP IPP Client Configuration IPP Client Setup Windows 98/ME Installing from the CD-ROM Installing using IPPCLIENT.EXESelect Printer for IPP Port Changing the IPP Port SettingsPort 2 if exists IPP Client Setup Windows 2000/XPUsing IPP Printers Internet LevelOne Printer Server Internet Mail PrintingSystem Requirements Mail ServerInternet Mail Printing Configuration Remote Printer Installation User SoftwareUser Software Port NameChecking the Printer Driver Using the new PortInterNet Printing Progress Printing through the InternetIf using 10/100BaseT, check the Hub TroubleshootingHardware & LAN Problems Problem No All the LevelOne Printer Servers LEDs are offProblem No My EPS file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My file doesnt print with the correct fontsLevel One Printer Servers Windows Printing To remove an existing printer port installationLevel One Printer Servers Problem No Then select File Properties Details Problem No My old printer cannot print or prints garbageLevelOne Printer Server device is not recognized Unix TroubleshootingCE Standards SpecificationsEnvironmental Specifications FCC StatementACK Parallel Port Pin AssignmentsFPS-3002USB FPS-3002USBFPS-2112 FPS-2112Feature Table Specifications3001TXU 3002USB Adding a TCP/IP Remote Printer Windows Server ConfigurationWindows NT4.0 Server Adding TCP/IP Printing SupportWindows 2000 Message Windows 2000/2003 ServerLevelOne Printer Server IP Address Configuration Other LevelOne Printer Server ConfigurationUnix Systems LPD Printing LPD on IBM AIXField Entry Adding Remote Printers ProcedureAction Sample Command LPD on SystemField Data LPD on LinuxLPD on BSD Printing using LPD NetWare NetWareCreating an Ndps Manager Object At the Identification page, click the Printer Agent List Creating an Ndps Printer AgentConfigure Port Handler Operation Mode NetWare 3Frame Type Print Server NetWare Print Server ModeNetWare Remote Printer Mode Device NamePreparation Using BiAdmin with ClientButtons Print Server Mode BinderyNetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers Operator If you have a single File ServerFile Server PrinterSelect Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordName Print Server Mode NDSQuickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDS