LevelOne FPS-2112, FPS-3001TXU, FPS-3002USB manual Web-Based Management, Preparation

Page 39

Chapter 6

6

 

Web-Based Management

 

 

 

This chapter explains how to use your Web Browser to configure the LevelOne Printer Server

Overview

The LevelOne Printer Server incorporates a HTTP server. This allows you to connect to the LevelOne Printer Server and configure it using your Web Browser. Most browsers should work, provided they support tables and forms.

Preparation

Because it supports dynamic IP Address allocation using DHCP, BOOTP, or RARP, the LevelOne Printer Server ships with an IP Address of 0.0.0.0. This is NOT a valid IP Address.

Therefore, you must do ONE of the following:

•Check your DHCP server (if you have one), and determine the IP Address allocated to the LevelOne Printer Server.

•Use the Setup Wizard, BiAdmin or another LevelOne Printer Server utility to allocate a valid IP Address to the LevelOne Printer Server.

•Add an entry to the arp table to associate the hardware address of the LevelOne Printer Server with the desired IP address, as follows:

arp

-s

IP_Address

00:c0:02:xx:xx:xx

(Unix)

arp

-s

IP_Address

00-c0-02-xx-xx-xx

(Windows)

Where:

IP_Address is the IP Address you wish to assign to the LevelOne Printer Server. 00:c0:02:xx:xx:xx is the hardware address of the LevelOne Printer Server.

Example (Unix):

arp -s 192.168.0.21 00:c0:02:12:34:56

Example (Windows):

arp -s 192.168.0.21 00−c0−02−12−34−56

Note: The hardware address of the LevelOne Printer Server is shown on a sticker on the base of the device.

- 36 -

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Level One Print Servers Table of Contents Appendix D NetWare Appendix a SpecificationsAppendix B Windows Server Configuration Appendix C Unix SystemsIntroduction FeaturesPackage Contents Safety InstructionsFPS-3001TXU 100BaseT Direct Attach LED IndicatorsPower Green Status Orange Description ModelsFPS-3002USB Power Green Status Red DescriptionFPS-2112 Status DescriptionGreen Red Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USB To restore the factory default settingsTo generate a Diagnostic print out Procedure LAN InstallationOverview ConfigurationUsing the Windows Wizard ProcedureLevelOne Printer Server Screen If the desired LevelOne Printer Server is not listedClient PC Configuration Printing MethodsWhich printing method should I use? Checking your Network Protocols Windows Network ConfigurationWindows Peer-to-peer Printing Windows 2000/XP SetupChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled PTP Printer Port Setup Windows 9x/ME SetupIf your LevelOne Printer Server is not listed Print Port Setup Peer-to-peer PrintingManagement Configure Printer PortRetry Interval Advanced Port OptionsPort BannerNetwork Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Capture Settings Windows 98/MELogin as Administrator Open the command prompt window Capture Settings Windows 2000/XPWindows with Server-based Print Queues When prompted for Network Path or Queue NameSoftware Requirements AppleTalk SetupAdvanced Setup and Management Macintosh AppleTalkMacintosh OS LPR printing SetupOperation BiAdmin Management UtilityInstallation RequirementsDevice List Icons Device StatusPrinter Status Refresh ConfigurationUpgrade WizardMain Menu ConfigurationDiagnostics menu MenusSystem Screen System TabTCP/IP Screen TCP/IP TabAppleTalk Screen AppleTalk TabNetBEUI Screen NetBEUI TabInternet Printing Screen Internet Printing TabPort Tab Physical PortLogical Port NetWare Tab Preparation Web-Based ManagementConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk Response Time Abort Job if ErrorNetBEUI Domain NameConnection General NetWareManagement Stations Snmp Simple Network Management ProtocolPrinter Ports Configure ServerOther Screens Server StatusInternet Printing Logical PrintersSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP IPP Client Configuration IPP Client Setup Windows 98/MEInstalling from the CD-ROM Installing using IPPCLIENT.EXESelect Printer for IPP Port Changing the IPP Port SettingsPort 2 if exists IPP Client Setup Windows 2000/XPUsing IPP Printers Internet LevelOne Printer Server Internet Mail PrintingSystem Requirements Mail ServerInternet Mail Printing Configuration Remote Printer Installation User SoftwareUser Software Port NameChecking the Printer Driver Using the new PortInterNet Printing Progress Printing through the InternetIf using 10/100BaseT, check the Hub TroubleshootingHardware & LAN Problems Problem No All the LevelOne Printer Servers LEDs are offProblem No My EPS file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My file doesnt print with the correct fontsLevel One Printer Servers Windows Printing To remove an existing printer port installationLevel One Printer Servers Problem No Then select File Properties Details Problem No My old printer cannot print or prints garbageLevelOne Printer Server device is not recognized Unix TroubleshootingCE Standards SpecificationsEnvironmental Specifications FCC StatementACK Parallel Port Pin AssignmentsFPS-3002USB FPS-3002USBFPS-2112 FPS-2112Feature Table Specifications3001TXU 3002USB Adding a TCP/IP Remote Printer Windows Server ConfigurationWindows NT4.0 Server Adding TCP/IP Printing SupportWindows 2000 Message Windows 2000/2003 ServerLevelOne Printer Server IP Address Configuration Other LevelOne Printer Server ConfigurationUnix Systems LPD Printing LPD on IBM AIXField Entry Adding Remote Printers ProcedureAction Sample Command LPD on SystemField Data LPD on LinuxLPD on BSD Printing using LPD NetWare NetWareCreating an Ndps Manager Object At the Identification page, click the Printer Agent List Creating an Ndps Printer AgentConfigure Port Handler Operation Mode NetWare 3Frame Type Print Server NetWare Print Server ModeNetWare Remote Printer Mode Device NamePreparation Using BiAdmin with ClientButtons Print Server Mode BinderyNetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers Operator If you have a single File ServerFile Server PrinterSelect Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordName Print Server Mode NDSQuickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDS

FPS-2112, FPS-3002USB, FPS-3001TXU specifications

The LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 are a series of advanced network video surveillance solutions designed to meet the growing demands of modern security applications. They incorporate cutting-edge technologies and features that cater to various surveillance needs, from small businesses to larger enterprises.

The FPS-3001TXU is a high-performance video server that offers reliable streaming capabilities for IP cameras. It supports dual-channel video encoding, allowing simultaneous transmission of two video streams with distinct resolutions and frame rates. This flexibility is particularly useful in environments requiring different levels of detail. The device is equipped with advanced H.264 compression technology, which reduces bandwidth usage while maintaining high video quality. Additionally, the FPS-3001TXU supports Power over Ethernet (PoE), simplifying installation by delivering both power and data via a single cable.

The FPS-3002USB takes versatility a step further by integrating USB connectivity for peripheral devices. This feature allows users to connect external storage for footage backup or additional input devices to enhance the overall security system functionality. The FPS-3002USB also boasts multiple video resolution options, ensuring compatibility with various camera systems. Its robust user interface makes configurations and management straightforward, catering to users with varying levels of technical expertise. The device supports secure data transmission through encryption, which is essential for protecting sensitive information.

Lastly, the FPS-2112 is designed for extensive monitoring applications and supports multiple video channels. This device excels in environments requiring comprehensive coverage, such as retail stores or corporate buildings. The FPS-2112 features state-of-the-art motion detection capabilities, enabling users to receive timely alerts during suspicious activities. The integration with cloud services allows for remote monitoring and management, providing users with access to their surveillance feeds from anywhere.

In summary, the LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 stand out in the realm of network video surveillance. With their advanced encoding technologies, flexible installation options, and user-friendly interfaces, these devices cater to diverse security requirements and enhance the overall efficacy of surveillance systems. Whether deployed in small setups or large-scale installations, these models deliver a robust and reliable solution for modern surveillance challenges.
Top Page Image Contents