LevelOne FPS-3001TXU, FPS-2112, FPS-3002USB manual Logical Printers, Internet Printing

Page 46

Web based Management

•Connected Printer- the model name of the printer connected to the port, if the printer name is known. (If the printer is not bi-directional, this information is unavailable.)

•Status - the current status of the printer (On-line, Off-line, Out of paper)

•Printing Information - this will show either Idle or Printing.

Logical Printers

Logical Printers (ports) can be used under Unix. For each Logical Printer, the following fields are available:

Logical Printer	Select the Logical Printer Port you wish to configure. (e.g. L1)
(Port)	Click the Get Data button to update the display with the current data
	for the selected logical printer.

Port	Select the Printer Port which the Logical printer will use.

Pre-string	The printer control string (in hex) to be sent to the printer before
	each print job. This string cannot exceed 15 characters.

Post String	The printer control string (in hex) to be sent to the printer after each
	print job. This string cannot exceed 15 characters.

Convert LF to	If checked, LF (line feed) characters are changed to CR+LF (carriage
CR+LF	return + line feed).

Internet Printing

See Internet Mail Printing in Chapter 7 for details of this feature.

- 43 -

Image 46

Contents Level One Print Servers Table of Contents Appendix C Unix Systems Appendix a SpecificationsAppendix B Windows Server Configuration Appendix D NetWareFeatures IntroductionSafety Instructions Package ContentsModels LED IndicatorsPower Green Status Orange Description FPS-3001TXU 100BaseT Direct AttachPower Green Status Red Description FPS-3002USBStatus Description FPS-2112Green Red To restore the factory default settings Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USBTo generate a Diagnostic print out LAN Installation ProcedureProcedure ConfigurationUsing the Windows Wizard OverviewIf the desired LevelOne Printer Server is not listed LevelOne Printer Server ScreenPrinting Methods Client PC ConfigurationWhich printing method should I use? Network Configuration Checking your Network Protocols WindowsWindows 2000/XP Setup Windows Peer-to-peer PrintingChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled Windows 9x/ME Setup PTP Printer Port SetupPrint Port Setup Peer-to-peer Printing If your LevelOne Printer Server is not listedConfigure Printer Port ManagementBanner Advanced Port OptionsPort Retry IntervalWindows SMB Printing Network NeighborhoodCapture Settings Windows 98/ME Printing from MS-DOS ProgramsCapture Settings Windows 2000/XP Login as Administrator Open the command prompt windowWhen prompted for Network Path or Queue Name Windows with Server-based Print QueuesMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsLPR printing Setup Macintosh OSRequirements BiAdmin Management UtilityInstallation OperationIcons Device Status Device ListPrinter Status Wizard ConfigurationUpgrade RefreshMenus ConfigurationDiagnostics menu Main MenuSystem Tab System ScreenTCP/IP Tab TCP/IP ScreenAppleTalk Tab AppleTalk ScreenNetBEUI Tab NetBEUI ScreenInternet Printing Tab Internet Printing ScreenPhysical Port Port TabLogical Port NetWare Tab Web-Based Management PreparationConfiguration Screens Connecting to the LevelOne Printer ServerAppleTalk Domain Name Abort Job if ErrorNetBEUI Response TimeConnection NetWare GeneralSnmp Simple Network Management Protocol Management StationsServer Status Configure ServerOther Screens Printer PortsLogical Printers Internet PrintingIPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing using IPPCLIENT.EXE IPP Client Setup Windows 98/MEInstalling from the CD-ROM IPP Client ConfigurationChanging the IPP Port Settings Select Printer for IPP PortIPP Client Setup Windows 2000/XP Port 2 if existsUsing IPP Printers Mail Server Internet Mail PrintingSystem Requirements Internet LevelOne Printer ServerInternet Mail Printing Configuration Port Name Installation User SoftwareUser Software Remote PrinterUsing the new Port Checking the Printer DriverPrinting through the Internet InterNet Printing ProgressProblem No All the LevelOne Printer Servers LEDs are off TroubleshootingHardware & LAN Problems If using 10/100BaseT, check the HubProblem No My file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My EPS file doesnt print with the correct fontsLevel One Printer Servers To remove an existing printer port installation Windows PrintingLevel One Printer Servers Problem No Problem No My old printer cannot print or prints garbage Then select File Properties DetailsUnix Troubleshooting LevelOne Printer Server device is not recognizedFCC Statement SpecificationsEnvironmental Specifications CE StandardsParallel Port Pin Assignments ACKFPS-3002USB FPS-3002USBFPS-2112 FPS-2112Specifications Feature Table3001TXU 3002USB Adding TCP/IP Printing Support Windows Server ConfigurationWindows NT4.0 Server Adding a TCP/IP Remote PrinterWindows 2000/2003 Server Windows 2000 MessageOther LevelOne Printer Server Configuration LevelOne Printer Server IP Address ConfigurationUnix Systems LPD on IBM AIX LPD PrintingField Entry LPD on System ProcedureAction Sample Command Adding Remote PrintersLPD on Linux Field DataLPD on BSD Printing using LPD NetWare NetWareCreating an Ndps Manager Object Creating an Ndps Printer Agent At the Identification page, click the Printer Agent ListConfigure Port Handler NetWare 3 Operation ModeFrame Type Device Name NetWare Print Server ModeNetWare Remote Printer Mode Print ServerUsing BiAdmin with Client PreparationPrint Server Mode Bindery ButtonsQuickset Button Bindery NetWare Configuration Button BinderyIf you have multiple File Servers Printer If you have a single File ServerFile Server OperatorPrinter Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NameNetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS Mode