LevelOne FPS-2112 manual Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USB

Page 9

Level One Printer Servers

Diagnostic Push Button(for FPS-3001TXU and FPS-3002USB)

FPS-3001TXU and FPS-3002USB are fitted with a "Diagnostic Push Button".

This button is used to restore the factory default settings, or to print a test page. The test page will contain all the current settings, and will be output to the printer attached to port 1.

To restore the factory default settings:

1.Turn the LevelOne Printer Server OFF.

2.Press and hold the diagnostic button. While pressing the button, switch the LevelOne Printer Server ON.

3.If you continue pressing the button for 10 seconds, a diagnostic page will be printed, showing the new settings.

To generate a Diagnostic print out

1.Ensure that both the LevelOne Printer Server and the printer attached to port 1 are ON.

2.Press the diagnostic button, and hold it in for 2 seconds.

3.The test page, containing the current settings, will be printed.

Note: PostScript printers are unable to print this page. If you have a PostScript printer on port 1, the test page will not be printed.

- 6 -

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Level One Print Servers Table of Contents Appendix B Windows Server Configuration Appendix a SpecificationsAppendix C Unix Systems Appendix D NetWareIntroduction FeaturesPackage Contents Safety InstructionsPower Green Status Orange Description LED IndicatorsModels FPS-3001TXU 100BaseT Direct AttachFPS-3002USB Power Green Status Red DescriptionFPS-2112 Status DescriptionGreen Red Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USB To restore the factory default settingsTo generate a Diagnostic print out Procedure LAN InstallationUsing the Windows Wizard ConfigurationProcedure OverviewLevelOne Printer Server Screen If the desired LevelOne Printer Server is not listedClient PC Configuration Printing MethodsWhich printing method should I use? Checking your Network Protocols Windows Network ConfigurationWindows Peer-to-peer Printing Windows 2000/XP SetupChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled PTP Printer Port Setup Windows 9x/ME SetupIf your LevelOne Printer Server is not listed Print Port Setup Peer-to-peer PrintingManagement Configure Printer PortPort Advanced Port OptionsBanner Retry IntervalNetwork Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Capture Settings Windows 98/MELogin as Administrator Open the command prompt window Capture Settings Windows 2000/XPWindows with Server-based Print Queues When prompted for Network Path or Queue NameAdvanced Setup and Management AppleTalk SetupMacintosh AppleTalk Software RequirementsMacintosh OS LPR printing SetupInstallation BiAdmin Management UtilityRequirements OperationDevice List Icons Device StatusPrinter Status Upgrade ConfigurationWizard RefreshDiagnostics menu ConfigurationMenus Main MenuSystem Screen System TabTCP/IP Screen TCP/IP TabAppleTalk Screen AppleTalk TabNetBEUI Screen NetBEUI TabInternet Printing Screen Internet Printing TabPort Tab Physical PortLogical Port NetWare Tab Preparation Web-Based ManagementConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk NetBEUI Abort Job if ErrorDomain Name Response TimeConnection General NetWareManagement Stations Snmp Simple Network Management ProtocolOther Screens Configure ServerServer Status Printer PortsInternet Printing Logical PrintersSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP Installing from the CD-ROM IPP Client Setup Windows 98/MEInstalling using IPPCLIENT.EXE IPP Client ConfigurationSelect Printer for IPP Port Changing the IPP Port SettingsPort 2 if exists IPP Client Setup Windows 2000/XPUsing IPP Printers System Requirements Internet Mail PrintingMail Server Internet LevelOne Printer ServerInternet Mail Printing Configuration User Software Installation User SoftwarePort Name Remote PrinterChecking the Printer Driver Using the new PortInterNet Printing Progress Printing through the InternetHardware & LAN Problems TroubleshootingProblem No All the LevelOne Printer Servers LEDs are off If using 10/100BaseT, check the HubProblem No My document didnt print to the right printer Problem No Why do I get an incorrect printout?Problem No My file doesnt print with the correct fonts Problem No My EPS file doesnt print with the correct fontsLevel One Printer Servers Windows Printing To remove an existing printer port installationLevel One Printer Servers Problem No Then select File Properties Details Problem No My old printer cannot print or prints garbageLevelOne Printer Server device is not recognized Unix TroubleshootingEnvironmental Specifications SpecificationsFCC Statement CE StandardsACK Parallel Port Pin AssignmentsFPS-3002USB FPS-3002USBFPS-2112 FPS-2112Feature Table Specifications3001TXU 3002USB Windows NT4.0 Server Windows Server ConfigurationAdding TCP/IP Printing Support Adding a TCP/IP Remote PrinterWindows 2000 Message Windows 2000/2003 ServerLevelOne Printer Server IP Address Configuration Other LevelOne Printer Server ConfigurationUnix Systems LPD Printing LPD on IBM AIXField Entry Action Sample Command ProcedureLPD on System Adding Remote PrintersField Data LPD on LinuxLPD on BSD Printing using LPD NetWare NetWareCreating an Ndps Manager Object At the Identification page, click the Printer Agent List Creating an Ndps Printer AgentConfigure Port Handler Operation Mode NetWare 3Frame Type NetWare Remote Printer Mode NetWare Print Server ModeDevice Name Print ServerPreparation Using BiAdmin with ClientButtons Print Server Mode BinderyNetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers File Server If you have a single File ServerPrinter OperatorSelect Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordName Print Server Mode NDSQuickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDS

FPS-2112, FPS-3002USB, FPS-3001TXU specifications

The LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 are a series of advanced network video surveillance solutions designed to meet the growing demands of modern security applications. They incorporate cutting-edge technologies and features that cater to various surveillance needs, from small businesses to larger enterprises.

The FPS-3001TXU is a high-performance video server that offers reliable streaming capabilities for IP cameras. It supports dual-channel video encoding, allowing simultaneous transmission of two video streams with distinct resolutions and frame rates. This flexibility is particularly useful in environments requiring different levels of detail. The device is equipped with advanced H.264 compression technology, which reduces bandwidth usage while maintaining high video quality. Additionally, the FPS-3001TXU supports Power over Ethernet (PoE), simplifying installation by delivering both power and data via a single cable.

The FPS-3002USB takes versatility a step further by integrating USB connectivity for peripheral devices. This feature allows users to connect external storage for footage backup or additional input devices to enhance the overall security system functionality. The FPS-3002USB also boasts multiple video resolution options, ensuring compatibility with various camera systems. Its robust user interface makes configurations and management straightforward, catering to users with varying levels of technical expertise. The device supports secure data transmission through encryption, which is essential for protecting sensitive information.

Lastly, the FPS-2112 is designed for extensive monitoring applications and supports multiple video channels. This device excels in environments requiring comprehensive coverage, such as retail stores or corporate buildings. The FPS-2112 features state-of-the-art motion detection capabilities, enabling users to receive timely alerts during suspicious activities. The integration with cloud services allows for remote monitoring and management, providing users with access to their surveillance feeds from anywhere.

In summary, the LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 stand out in the realm of network video surveillance. With their advanced encoding technologies, flexible installation options, and user-friendly interfaces, these devices cater to diverse security requirements and enhance the overall efficacy of surveillance systems. Whether deployed in small setups or large-scale installations, these models deliver a robust and reliable solution for modern surveillance challenges.
Top Page Image Contents