LevelOne FPS-3002USB, FPS-2112 manual If you have a single File Server, Printer, Operator, User

Page 86

NetWare

•The right column lists any available servers. Note that to be available, you must be logged into the Server with Supervisor rights.

•Use the “<<” and “>>” buttons to move file servers to and from the Serviced Fileserver list on the left.

•When completed, click Next. This will create a NetWare Print Server object on the Serviced Fileserver if it does not yet exist. The NetWare Print Server will have the same name as the NetWare Print Server on the Master File Server.

•After clicking Next, you will see the screen below.

If you have a single File Server:

Clicking the NetWare Configuration button will reveal the following screen:

Figure 55: Configure NetWare Server (Bindery PS mode)

•The NetWare Print Server name is shown at the top of the screen. If more than 1 NetWare server is used, this name is the same on every NetWare server.

•The options available are :

File Server

This drop-down list will be operational only if you have assigned more

 

than 1 file server to be serviced by the LevelOne Printer Server.

Printer

Create Printer Objects, assign Print Queues, and assign users to Print

 

Queues (Required). See the following section for details.

Operator

Assign Operators to the NetWare Print Server object. (Optional)

 

These operators will then have permission to manage the NetWare Print

 

Server object. The screen is identical to Figure 59: Assign Operator to

 

Queue (Bindery).

User

Assign Users to the NetWare Print Server object. (Optional)

 

These users will then be able to view the status of the NetWare Print

 

Server object. The screen is identical to Figure 58: Assign Users to

 

Queue (Bindery).

Password

Change the login password used by the LevelOne Printer Server when it

 

connects to the NetWare server. By default, there is no password. See

 

Password for details.

- 83 -

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Level One Print Servers Table of Contents Appendix C Unix Systems Appendix a SpecificationsAppendix B Windows Server Configuration Appendix D NetWareFeatures IntroductionSafety Instructions Package ContentsModels LED IndicatorsPower Green Status Orange Description FPS-3001TXU 100BaseT Direct AttachPower Green Status Red Description FPS-3002USBGreen Red FPS-2112Status Description To generate a Diagnostic print out Diagnostic Push Buttonfor FPS-3001TXU and FPS-3002USBTo restore the factory default settings LAN Installation ProcedureProcedure ConfigurationUsing the Windows Wizard OverviewIf the desired LevelOne Printer Server is not listed LevelOne Printer Server ScreenWhich printing method should I use? Client PC ConfigurationPrinting Methods Network Configuration Checking your Network Protocols WindowsWindows 2000/XP Setup Windows Peer-to-peer PrintingChoose Standard TCP/IP Port, then click New Port Ensure the LPR Byte Counting Enabled setting is Enabled Windows 9x/ME Setup PTP Printer Port SetupPrint Port Setup Peer-to-peer Printing If your LevelOne Printer Server is not listedConfigure Printer Port ManagementBanner Advanced Port OptionsPort Retry IntervalWindows SMB Printing Network NeighborhoodCapture Settings Windows 98/ME Printing from MS-DOS ProgramsCapture Settings Windows 2000/XP Login as Administrator Open the command prompt windowWhen prompted for Network Path or Queue Name Windows with Server-based Print QueuesMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsLPR printing Setup Macintosh OSRequirements BiAdmin Management UtilityInstallation OperationPrinter Status Device ListIcons Device Status Wizard ConfigurationUpgrade RefreshMenus ConfigurationDiagnostics menu Main MenuSystem Tab System ScreenTCP/IP Tab TCP/IP ScreenAppleTalk Tab AppleTalk ScreenNetBEUI Tab NetBEUI ScreenInternet Printing Tab Internet Printing ScreenLogical Port Port TabPhysical Port NetWare Tab Web-Based Management PreparationAppleTalk Connecting to the LevelOne Printer ServerConfiguration Screens Domain Name Abort Job if ErrorNetBEUI Response TimeConnection NetWare GeneralSnmp Simple Network Management Protocol Management StationsServer Status Configure ServerOther Screens Printer PortsLogical Printers Internet PrintingInternet Printing Protocol IPP Special FeaturesIPP Server Configuration Installing using IPPCLIENT.EXE IPP Client Setup Windows 98/MEInstalling from the CD-ROM IPP Client ConfigurationChanging the IPP Port Settings Select Printer for IPP PortIPP Client Setup Windows 2000/XP Port 2 if existsUsing IPP Printers Mail Server Internet Mail PrintingSystem Requirements Internet LevelOne Printer ServerInternet Mail Printing Configuration Port Name Installation User SoftwareUser Software Remote PrinterUsing the new Port Checking the Printer DriverPrinting through the Internet InterNet Printing ProgressProblem No All the LevelOne Printer Servers LEDs are off TroubleshootingHardware & LAN Problems If using 10/100BaseT, check the HubProblem No My file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My EPS file doesnt print with the correct fontsLevel One Printer Servers To remove an existing printer port installation Windows PrintingLevel One Printer Servers Problem No Problem No My old printer cannot print or prints garbage Then select File Properties DetailsUnix Troubleshooting LevelOne Printer Server device is not recognizedFCC Statement SpecificationsEnvironmental Specifications CE StandardsParallel Port Pin Assignments ACKFPS-3002USB FPS-3002USBFPS-2112 FPS-21123001TXU 3002USB Feature TableSpecifications Adding TCP/IP Printing Support Windows Server ConfigurationWindows NT4.0 Server Adding a TCP/IP Remote PrinterWindows 2000/2003 Server Windows 2000 MessageUnix Systems LevelOne Printer Server IP Address ConfigurationOther LevelOne Printer Server Configuration Field Entry LPD PrintingLPD on IBM AIX LPD on System ProcedureAction Sample Command Adding Remote PrintersLPD on Linux Field DataLPD on BSD Printing using LPD Creating an Ndps Manager Object NetWareNetWare Creating an Ndps Printer Agent At the Identification page, click the Printer Agent ListConfigure Port Handler Frame Type Operation ModeNetWare 3 Device Name NetWare Print Server ModeNetWare Remote Printer Mode Print ServerUsing BiAdmin with Client PreparationPrint Server Mode Bindery ButtonsIf you have multiple File Servers NetWare Configuration Button BinderyQuickset Button Bindery Printer If you have a single File ServerFile Server OperatorPrinter Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NameNetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS Mode

FPS-2112, FPS-3002USB, FPS-3001TXU specifications

The LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 are a series of advanced network video surveillance solutions designed to meet the growing demands of modern security applications. They incorporate cutting-edge technologies and features that cater to various surveillance needs, from small businesses to larger enterprises.

The FPS-3001TXU is a high-performance video server that offers reliable streaming capabilities for IP cameras. It supports dual-channel video encoding, allowing simultaneous transmission of two video streams with distinct resolutions and frame rates. This flexibility is particularly useful in environments requiring different levels of detail. The device is equipped with advanced H.264 compression technology, which reduces bandwidth usage while maintaining high video quality. Additionally, the FPS-3001TXU supports Power over Ethernet (PoE), simplifying installation by delivering both power and data via a single cable.

The FPS-3002USB takes versatility a step further by integrating USB connectivity for peripheral devices. This feature allows users to connect external storage for footage backup or additional input devices to enhance the overall security system functionality. The FPS-3002USB also boasts multiple video resolution options, ensuring compatibility with various camera systems. Its robust user interface makes configurations and management straightforward, catering to users with varying levels of technical expertise. The device supports secure data transmission through encryption, which is essential for protecting sensitive information.

Lastly, the FPS-2112 is designed for extensive monitoring applications and supports multiple video channels. This device excels in environments requiring comprehensive coverage, such as retail stores or corporate buildings. The FPS-2112 features state-of-the-art motion detection capabilities, enabling users to receive timely alerts during suspicious activities. The integration with cloud services allows for remote monitoring and management, providing users with access to their surveillance feeds from anywhere.

In summary, the LevelOne FPS-3001TXU, FPS-3002USB, and FPS-2112 stand out in the realm of network video surveillance. With their advanced encoding technologies, flexible installation options, and user-friendly interfaces, these devices cater to diverse security requirements and enhance the overall efficacy of surveillance systems. Whether deployed in small setups or large-scale installations, these models deliver a robust and reliable solution for modern surveillance challenges.
Top Page Image Contents