Lantronix LX6 manual Commands and Levels, Accept tunnel-accept1 level commands

5: Commands and Levels

•host 10 (tunnel-connect-host:1:10)

•host 11 (tunnel-connect-host:1:11)

•host 12 (tunnel-connect-host:1:12)

•host 13 (tunnel-connect-host:1:13)

•host 14 (tunnel-connect-host:1:14)

•host 15 (tunnel-connect-host:1:15)

•host 16 (tunnel-connect-host:1:16)

•disconnect (tunnel-disconnect:1)

•modem (tunnel-modem:1)

•packing (tunnel-packing:1)

•serial (tunnel-serial:1)

•xml (xml)

	Table 5-1 Commands and Levels
accept (tunnel-accept:1) level commands
accept mode always		Enables the tunneling server to always accept tunneling
		connections.
accept mode any character		Enables the tunneling server to accept tunneling connec-
		tions only when a
		character is received through the corresponding line (seri-
		al port).
accept mode disable		Disables accept mode tunneling.
accept mode modem control asserted		Enables the tunneling server to accept tunneling connec-
		tions when the modem
		control pin is asserted.
accept mode modem emulation		Enables modem emulation for accept mode tunneling.
accept mode start character		Enables accept mode tunneling when the configured start
		character
		is received on the line.
aes decrypt key <hexadecimal>		Sets the accept tunnel AES decrypt key with up to 16
		bytes.
		Each byte is represented by two adjacent hex digits.
		Bytes may run together or be separated by optional punc-
		tuation:
		123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
		Note that quotes must enclose the value if it contains
		spaces.
aes decrypt key text <text>		Sets the accept tunnel AES decrypt key with up to 16
		bytes.
		Each byte is represented by a single character.
		Note that quotes must enclose the value if it contains
		spaces.
aes encrypt key <hexadecimal>		Sets the accept tunnel AES encrypt key with up to 16
		bytes.
		Each byte is represented by two adjacent hex digits.
		Bytes may run together or be separated by optional punc-
		tuation:
		123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
		Note that quotes must enclose the value if it contains
		spaces.
aes encrypt key text <text>		Sets the accept tunnel AES encrypt key with up to 16
		bytes.

XPort® Pro Lx6 Embedded Device Server Command Reference 39