Lantronix LX6 manual Http config-http level commands

	5: Commands and Levels
	alive timeout.
exit	Exits to the next higher level.
no address	Removes the remote host address used to establish tun-
	neling connections.
no aes decrypt key	Removes the connect tunnel AES decrypt key.
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no port	Removes the remote port used to establish tunnel con-
	nections.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunnel-
	ing.
protocol udp	Uses UDP protocol for connect mode tunneling.
protocol udp aes	Uses UDP protocol with AES encryption for connect mode
	tunneling.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	show connection statistics
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
write	Stores the current configuration in permanent memory.
http (config-http) level commands
auth <uri>	Creates a new HTTP server authentication directive.
	<uri> = URI of the server.
auth type <uri> digest	Sets an HTTP server authentication directive to the Digest
	Access
	Authentication scheme.
	<uri> = URI of the server.
auth type <uri> none	Sets the authentication type for an HTTP server authenti-
	cation directive to
	none.
	<uri> = URI of the server.
authentication timeout <minutes>	For any Digest AuthType, sets the timeout for authentica-
	tion.
	<minutes> = authentication timeout value.
clear counters	Sets the HTTP counters to zero.
clear log	Clears the HTTP server log.
clrscrn	Clears the screen.
default authentication timeout	Resets the authentication timeout to its default value.
default log format	Restores the HTTP Server log format string to its default
	value.
default max bytes	Resets the maximum bytes to its default value.
default max log entries	Restores the default maximum number of HTTP Server

XPort® Pro Lx6 Embedded Device Server Command Reference 74