Lantronix LX6 manual Host 9 tunnel-connect-host19 level commands

	5: Commands and Levels
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunnel-
	ing.
protocol udp	Uses UDP protocol for connect mode tunneling.
protocol udp aes	Uses UDP protocol with AES encryption for connect mode
	tunneling.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	show connection statistics
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
write	Stores the current configuration in permanent memory.
host 9 (tunnel-connect-host:1:9) level commands
address <text>	Sets the remote host to establish tunneling connections
	with.
	<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes decrypt key text <text>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key <hexadecimal>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key text <text>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
auto show statistics	show connection statistics
clrscrn	Clears the screen.
default protocol	Restores the default protocol as "TCP".
default tcp keep alive	Restores the default 45 second connect mode TCP keep

XPort® Pro Lx6 Embedded Device Server Command Reference 73