Lantronix LX6 manual Cp output tunnel-accept-cpoutput1 level commands, Cpm cpm level commands

	5: Commands and Levels
	<text> = CP Group.
no group	Removes the CP Set Group for connect mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:1) level commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon accept
	mode connection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for accept mode connection.
default disconnection value	Restores the default value for accept mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon accept
	mode disconnection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking
	an accept
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for accept mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
cpm (cpm) level commands
add <cp> to <group>	Adds the specified CP to the specified group.
	<cp> = configurable pin.
	<group> = the name of the group to which you want to
	add the CP.
add <cp> to <group> <bit>	Adds a specified CP to a specified group at a specified bit
	position.
	<cp> = configurable pin.
	<group> = the name of the group to which you want to
	add the CP.
	<bit> = bit position.
clrscrn	Clears the screen.
create <group>	Creates a configurable pin (CP) group.
	<group> = the name for the new group.
delete <cp> from <group>	Removes a CP from a specified group and sets the CP to
	its default
	configuration of input.
	<cp> = configurable pin.
	<group> = the name of the group.
delete <group>	Removes a group and resets all CPs in that group to the
	default
	configuration of input.
	<group> = the name of the group.
disable <group>	Disables the specified group.
	<group> = the name of the group.

XPort® Pro Lx6 Embedded Device Server Command Reference 46