Lantronix LX6 manual Configure config level commands, If instance

	5: Commands and Levels
quit connect line <control>	Sets the string used to quit the "connect line", "telnet", and
	"ssh" commands.
	The characters may be input as text or control.
	A control character has the form <control>C.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
telnet	Change to menu level for Telnet configuration and status.
write	Stores the current configuration in permanent memory.
configure (config) level commands
arp	Changes to the command level for ARP configuration and
	status.
cli	Change to menu level for CLI configuration and status
clrscrn	Clears the screen.
diagnostics	Enters the diagnostics level.
discovery	Enters the discovery level.
exit	Exits to the enable level.
ftp	Enters the ftp level.
http	Enters the http level.
icmp	Changes to the command level for ICMP configuration
	and status.
icmpv6	Changes to the command level for ICMPv6 configuration
	and status.
if <instance>	Changes to the interface configuration level.
ip	Changes to the command level for IP configuration and
	status.
kill telnet <session>	Kills Telnet session with index from "show sessions"
show	Displays system information.
show history	Displays the last 20 commands entered during the current
	CLI session.
smtp	Changes to the command level for SMTP configuration
	and status.
syslog	Enters the syslog level.
terminal <line>	Enters the configure-terminal level.
	<line> = number of the terminal line (serial port) to be
	configured.
terminal network	Enters the configure-terminal level for the network.
write	Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
block network disable	Forwards (tunnels) network data in connect mode tunnel-
	ing.
block network enable	Discards all data coming in from the connect mode tunnel
	before forwarding
	it to the serial interface (generally used for debugging).
block serial disable	Forwards (tunnels) serial data in connect mode tunneling.
block serial enable	Discards all data coming in from the serial interface before
	forwarding
	it to the connect mode tunnel (generally used for debug-
	ging).

XPort® Pro Lx6 Embedded Device Server Command Reference 42