Lantronix LX6 manual Figured, Terminal network config-terminalnetwork level commands

	5: Commands and Levels
	<line> = number of the terminal line (serial port) to be
	configured.
terminal network	Enters the configure-terminal level for the network.
terminal type <text>	Sets the terminal type.
tunnel <line>	Enters the tunnel level.
	<line> = number of the tunnel line (serial port) to be con-
	figured.
write	Stores the current configuration in permanent memory.
terminal network (config-terminal:network) level commands
break duration <milliseconds>	Sets how long a break should last when it is being sent to
	the line.
	<milliseconds> = number of milliseconds.
clrscrn	Clears the screen.
default break duration	Restores the break duration to the default value (500 ms).
default terminal type	Sets the default terminal type, "UNKNOWN".
echo disable	Disables echoing of characters received on the line back
	to the line.
echo enable	Enables echoing of characters received on the line back
	to the line.
exit	Exits to the configuration level.
exit connect menu disable	On the login connect menu, removes the menu item al-
	lowing the user to exit
	to the CLI.
exit connect menu enable	On the login connect menu, inserts the menu item allow-
	ing the user to exit
	to the CLI.
line <line>	Enters the line level.
	<line> = number of the line (serial port) to be configured.
login connect menu disable	Disables the login connect menu, so a user will get the
	CLI immediately
	after logging in.
login connect menu enable	Enables the login connect menu, so a user will get the
	menu rather than the
	CLI immediately after logging in.
no send break	Removes the configured send break character.
preview connect menu	Shows the layout of the connect menu with current set-
	tings.
send break <control>	Sets the optional send break character.
	<text> = the character.
	The character may be input as text, control, decimal, or
	hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
terminal <line>	Enters the configure-terminal level.
	<line> = number of the terminal line (serial port) to be
	configured.
terminal network	Enters the configure-terminal level for the network.

XPort® Pro Lx6 Embedded Device Server Command Reference 85