Lantronix XPort manual Using the Serial Port, Setup Menu Options

Page 22

4: Using Setup Mode for Configuration

3.To enter the Setup Mode, press Enter within 5 seconds. The configuration settings display, followed by the setup menu options.

Figure 4-2 Setup Menu Options

Change Setup:

0 Server configuration

1 Channel 1 configuration

3 E-mail settings

5 Expert settings

6Security

7Factory defaults

8Exit without save

9 Save and exit

Your choice

?

4.Select an option on the menu by entering the number of the option in the Your choice ? field and pressing Enter.

5.To enter a value for a parameter, type the value and press Enter, or to confirm a current value, just press Enter.

6.When you are finished, save the new configurations (option 9). The unit reboots.

Using the Serial Port

To initially configure the unit through a serial connection:

1.Connect a console terminal or PC running a terminal emulation program to your unit's serial port. The default serial port settings are 9600 baud, 8 bits, no parity, 1-stop bit, no-flow control.

2.To enter Setup Mode, reset the unit, either by pushing the red reset button, or cycling the unit's power (power off and back on). The self-test will begin. You have one second to enter three lowercase x characters (xxx).

Note: The easiest way to enter Setup Mode is to hold down the x key at the terminal (or emulation) while resetting the unit.

3.At this point, the screen display is the same as when you use a Telnet connection. To continue, go to step 4 in Using a Telnet Connection on page 21.

The following figure shows all of the configuration parameters. The remainder of this chapter describes each parameter in detail.

XPort™ User Guide

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents XPort User Guide Copyright and Trademark Disclaimer and Revisions Date Rev CommentsContents Mail Settings Gpio Interface Purpose and Audience Using This GuideChapter Summary Additional Documentation XPort Integration GuideCapabilities IntroductionApplications Hardware Address Protocol SupportAddresses and Port Numbers IP AddressAssigning an IP Address Getting Started Using DeviceInstaller to Assign an IP AddressInstalling DeviceInstaller Required InformationAssigning an IP Address Select Assign a specific IP address and click NextUsing Web-Manager to Configure the Unit Lantronix Web-ManagerUnit Configuration Settings Server Properties Port Properties Edit the following fields as necessaryFlush Mode Input Buffer Connect Mode SettingsDedicated Connection Additional Settings Packing AlgorithmFactory Settings Update SettingsAccessing Setup Mode Using Setup Mode for ConfigurationUsing a Telnet Connection Using the Serial Port Setup Menu OptionsSetup Mode Configuration Parameters Set Gateway IP Address Server Configuration Network ConfigurationChange Telnet Configuration Password Netmask Number of Bits for Host PartDhcp Name Channel 1 Configuration Serial Port ParametersBaudrate Mode Option Interface ModeMode XPort-485 only Common I/F Mode Setting Binary HexFlow Control Option Hex FlowPort Number Port Numbers Reserved forConnect Mode Option Connect ModeIncoming Connection Response Autostart Automatic Connection HostlistDatagram Type Modem ModeWithout Echo Message Meaning 11. Modem Mode MessagesFull Verbose Remote IP Address Modem Mode Function Command12. Modem Mode Commands Remote Port13. Disconnect Mode Options Flush Mode Buffer FlushingDisconnect Mode Option 14. Flush Mode OptionsPack Control OptionSend Characters DisConnTime Inactivity TimeoutChannel Port Password Telnet Terminal TypeMail Settings Mail SetupExpert Settings Trigger SetupMonitor Mode at Bootup ARP Cache timeout in secondsHigh CPU Performance mode RS-485 TX Enable Active LevelDisable Telnet Setup Security SettingsDisable Snmp Snmp Community NameDisable Web Server Disable Tftp Firmware UpgradeDisable Port 77FE Hex Disable Echo PortsCommand syntax telnet Encryption TutorialDisable Port 77F0 Hex Factory DefaultsEnable Enhanced Password Channel 1 Configuration DefaultsSecurity Settings Defaults Exit Configuration ModeExpert Settings Defaults Mail SettingsGpio Interface Configurable PinsFeatures Control ProtocolByte 0 Command Types CommandsGuidelines Command 12h, Get Active Levels Command 10h, Get FunctionsCommand 11h, Get Directions Command 13h, Get Current StatesCommand 1Bh, Set States Command 1Ah, Set Active LevelsExamples Command details Obtaining Firmware Reloading Firmware Using TftpUpdating Firmware ROM FileUser Guide Monitor Mode Commands Entering Monitor Mode via the Serial PortEntering Monitor Mode via the Network Port Monitoring the NetworkCommand Command Name Function Response MeaningProblems and Error Messages TroubleshootingProblem/Message Reason Solution Address and Network Class Please try again Caps Lock is not onServer, the No Connection With Technical Support Email eutechsupp@lantronix.com

XPort specifications

The Lantronix XPort is a compact and powerful embedded networking module that enables devices to connect to the Internet and communicate over a network. Small in size yet packed with features, the XPort is ideal for applications that require network connectivity without the complexity and cost associated with traditional networking solutions.

One of the standout features of the XPort is its small form factor. Measuring just 1.6 inches by 1.9 inches, it is designed for seamless integration into a variety of devices, making it a popular choice for manufacturers looking to add networking capabilities to their products without occupying much physical space.

The XPort utilizes the robust and widely used TCP/IP protocol stack, allowing it to facilitate reliable data communication over the Internet and other IP networks. This provides developers with a familiar framework for implementing network functionality, while also ensuring compatibility with various networking standards.

Equipped with a built-in web server, the XPort allows for easy configuration and management through a standard web browser. This user-friendly feature enables developers and end users to interact with the device effortlessly, simplifying tasks such as firmware updates and network settings adjustments.

Another key technology employed in the XPort is its serial-to-Ethernet capabilities. This feature converts serial data from devices into network packets, enabling legacy devices that communicate through serial ports to be connected to modern networks. This is particularly beneficial for industries with a significant number of legacy devices still in operation.

The XPort also incorporates security features, including SSL and SSH, which help protect data transmitted over the network. These security measures are essential in today's digital landscape, where data breaches and unauthorized access are growing concerns.

With its low power consumption and versatile applications, the Lantronix XPort is suitable for a variety of IoT applications, including healthcare devices, industrial automation, and smart metering. Its ability to operate in harsh environments enhances its appeal to manufacturers looking to deploy reliable networking solutions.

In summary, the Lantronix XPort offers a blend of compact design, advanced networking capabilities, and essential security features, making it a valuable asset for any project requiring efficient network connectivity. Its compatibility with existing technologies and ease of integration make it an ideal choice for modern IoT applications.
Top Page Image Contents