Lantronix XPort manual Using This Guide, Purpose and Audience, Chapter Summary

Page 7

1: Using This Guide

Purpose and Audience

This guide provides the information needed to configure, use and update the XPort™ and is intended for software developers and system integrators who are embedding the XPort in their designs. The information in this guide is relevant to XPort with firmware version 1.5 and higher.

Note: This document covers XPort™ Device Server versions XP1001000-01, XP1001000-03, and XP1004000-03 (XPort-485).

Chapter Summary

The remaining chapters in this guide include:

2:Introduction

Describes the main features of the XPort and the

 

protocols it supports.

3:Getting Started

Provides information for getting your unit up and running,

 

using DeviceInstaller to assign an IP address, and Web-

 

Manager to set parameters such as port and server

 

properties.

4:Using Setup Mode

Provides instructions for accessing Setup Mode

 

(command line interface) using a Telnet connection

 

through the network or a terminal or terminal emulation

 

program through the serial port. Details the parameters

 

that you must configure.

5:GPIO Interface

Provides instructions for configuring the three General

 

Purpose I/O pins (CP1-3).

6:Updating Firmware

Provides instructions for obtaining the latest firmware and

 

updating the XPort.

7:Monitoring the Network

Provides instructions for accessing and using the

 

command line interface for monitoring the network and

 

diagnosing problems.

8:Troubleshooting

Describes common problems and error messages and

 

how to contact Lantronix Technical Support.

XPort™ User Guide

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents XPort User Guide Copyright and Trademark Date Rev Comments Disclaimer and RevisionsContents Mail Settings Gpio Interface Purpose and Audience Using This GuideChapter Summary XPort Integration Guide Additional DocumentationCapabilities IntroductionApplications IP Address Protocol SupportAddresses and Port Numbers Hardware AddressAssigning an IP Address Required Information Using DeviceInstaller to Assign an IP AddressInstalling DeviceInstaller Getting StartedSelect Assign a specific IP address and click Next Assigning an IP AddressLantronix Web-Manager Using Web-Manager to Configure the UnitUnit Configuration Settings Server Properties Edit the following fields as necessary Port PropertiesFlush Mode Input Buffer Connect Mode SettingsDedicated Connection Packing Algorithm Additional SettingsUpdate Settings Factory SettingsAccessing Setup Mode Using Setup Mode for ConfigurationUsing a Telnet Connection Setup Menu Options Using the Serial PortSetup Mode Configuration Parameters Netmask Number of Bits for Host Part Server Configuration Network ConfigurationChange Telnet Configuration Password Set Gateway IP AddressDhcp Name Channel 1 Configuration Serial Port ParametersBaudrate Common I/F Mode Setting Binary Hex Interface ModeMode XPort-485 only Mode OptionPort Numbers Reserved for FlowPort Number Flow Control Option HexConnect Mode Option Connect ModeIncoming Connection Response Hostlist Autostart Automatic ConnectionDatagram Type Modem ModeWithout Echo Message Meaning 11. Modem Mode MessagesFull Verbose Remote Port Modem Mode Function Command12. Modem Mode Commands Remote IP Address14. Flush Mode Options Flush Mode Buffer FlushingDisconnect Mode Option 13. Disconnect Mode OptionsOption Pack ControlTelnet Terminal Type DisConnTime Inactivity TimeoutChannel Port Password Send CharactersMail Setup Mail SettingsTrigger Setup Expert SettingsRS-485 TX Enable Active Level ARP Cache timeout in secondsHigh CPU Performance mode Monitor Mode at BootupSnmp Community Name Security SettingsDisable Snmp Disable Telnet SetupDisable Echo Ports Disable Tftp Firmware UpgradeDisable Port 77FE Hex Disable Web ServerEncryption Tutorial Command syntax telnetChannel 1 Configuration Defaults Factory DefaultsEnable Enhanced Password Disable Port 77F0 HexMail Settings Exit Configuration ModeExpert Settings Defaults Security Settings DefaultsControl Protocol Configurable PinsFeatures Gpio InterfaceByte 0 Command Types CommandsGuidelines Command 13h, Get Current States Command 10h, Get FunctionsCommand 11h, Get Directions Command 12h, Get Active LevelsCommand 1Bh, Set States Command 1Ah, Set Active LevelsExamples Command details ROM File Using TftpUpdating Firmware Obtaining Firmware Reloading FirmwareUser Guide Monitoring the Network Entering Monitor Mode via the Serial PortEntering Monitor Mode via the Network Port Monitor Mode CommandsResponse Meaning Command Command Name FunctionProblems and Error Messages TroubleshootingProblem/Message Reason Solution Caps Lock is not on Address and Network Class Please try againServer, the No Connection With Email eutechsupp@lantronix.com Technical Support

XPort specifications

The Lantronix XPort is a compact and powerful embedded networking module that enables devices to connect to the Internet and communicate over a network. Small in size yet packed with features, the XPort is ideal for applications that require network connectivity without the complexity and cost associated with traditional networking solutions.

One of the standout features of the XPort is its small form factor. Measuring just 1.6 inches by 1.9 inches, it is designed for seamless integration into a variety of devices, making it a popular choice for manufacturers looking to add networking capabilities to their products without occupying much physical space.

The XPort utilizes the robust and widely used TCP/IP protocol stack, allowing it to facilitate reliable data communication over the Internet and other IP networks. This provides developers with a familiar framework for implementing network functionality, while also ensuring compatibility with various networking standards.

Equipped with a built-in web server, the XPort allows for easy configuration and management through a standard web browser. This user-friendly feature enables developers and end users to interact with the device effortlessly, simplifying tasks such as firmware updates and network settings adjustments.

Another key technology employed in the XPort is its serial-to-Ethernet capabilities. This feature converts serial data from devices into network packets, enabling legacy devices that communicate through serial ports to be connected to modern networks. This is particularly beneficial for industries with a significant number of legacy devices still in operation.

The XPort also incorporates security features, including SSL and SSH, which help protect data transmitted over the network. These security measures are essential in today's digital landscape, where data breaches and unauthorized access are growing concerns.

With its low power consumption and versatile applications, the Lantronix XPort is suitable for a variety of IoT applications, including healthcare devices, industrial automation, and smart metering. Its ability to operate in harsh environments enhances its appeal to manufacturers looking to deploy reliable networking solutions.

In summary, the Lantronix XPort offers a blend of compact design, advanced networking capabilities, and essential security features, making it a valuable asset for any project requiring efficient network connectivity. Its compatibility with existing technologies and ease of integration make it an ideal choice for modern IoT applications.
Top Page Image Contents