Lantronix XPort Updating Firmware, Obtaining Firmware Reloading Firmware, Using Tftp, ROM File

Page 50

6: Updating Firmware

Obtaining Firmware

You can obtain the most up-to-date firmware and release notes for the unit from the Lantronix web site (www.lantronix.com) or by using anonymous FTP (ftp.lantronix.com).

Reloading Firmware

There are several ways to update the unit's internal operational code (*.ROM): via DeviceInstaller (the preferred way), via TFTP, or via the serial port using DeviceInstaller. You can also update the unit's internal Web interface (*.COB) via TFTP or DeviceInstaller.

Here are typical names for those files. Check the Lantronix web site for the latest versions and release notes.

 

Table 6-1. Firmware Files

 

 

 

ROM File

 

COB

XPTEXE16.ROM

 

GEN3402.COB (Web-Manager)

 

 

 

Using TFTP

To download new firmware from a computer:

1.Use a TFTP client to send a binary file to the unit (*.ROM to upgrade the unit's internal operational code and *.COB to upgrade its internal Web interface).

Note: TFTP requires the .ROM (binary) version of the unit's internal operational code.

2.In the TFTP server field, enter the IP address of the unit being upgraded.

3.Select Upload operation and Binary format.

4.Enter the full path of the firmware file in the Local file name field.

5.In the Remote file name field, enter the current internal operational code or WEB6 for the internal Web interface. (For XPort-01, X1 = Standard Tunnel; for XPort-03, X2 = Standard Tunnel; for XPort-485, X3 = Standard Tunnel)

6.Click the Upload Now button to transfer the file to the unit.

XPort™ User Guide

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents XPort User Guide Copyright and Trademark Disclaimer and Revisions Date Rev CommentsContents Mail Settings Gpio Interface Chapter Summary Using This GuidePurpose and Audience Additional Documentation XPort Integration GuideApplications IntroductionCapabilities Hardware Address Protocol SupportAddresses and Port Numbers IP AddressAssigning an IP Address Getting Started Using DeviceInstaller to Assign an IP AddressInstalling DeviceInstaller Required InformationAssigning an IP Address Select Assign a specific IP address and click NextUsing Web-Manager to Configure the Unit Lantronix Web-ManagerUnit Configuration Settings Server Properties Port Properties Edit the following fields as necessaryDedicated Connection Connect Mode SettingsFlush Mode Input Buffer Additional Settings Packing AlgorithmFactory Settings Update SettingsUsing a Telnet Connection Using Setup Mode for ConfigurationAccessing Setup Mode Using the Serial Port Setup Menu OptionsSetup Mode Configuration Parameters Set Gateway IP Address Server Configuration Network ConfigurationChange Telnet Configuration Password Netmask Number of Bits for Host PartBaudrate Channel 1 Configuration Serial Port ParametersDhcp Name Mode Option Interface ModeMode XPort-485 only Common I/F Mode Setting Binary HexFlow Control Option Hex FlowPort Number Port Numbers Reserved forIncoming Connection Connect ModeConnect Mode Option Response Autostart Automatic Connection HostlistWithout Echo Modem ModeDatagram Type Full Verbose 11. Modem Mode MessagesMessage Meaning Remote IP Address Modem Mode Function Command12. Modem Mode Commands Remote Port13. Disconnect Mode Options Flush Mode Buffer FlushingDisconnect Mode Option 14. Flush Mode OptionsPack Control OptionSend Characters DisConnTime Inactivity TimeoutChannel Port Password Telnet Terminal TypeMail Settings Mail SetupExpert Settings Trigger SetupMonitor Mode at Bootup ARP Cache timeout in secondsHigh CPU Performance mode RS-485 TX Enable Active LevelDisable Telnet Setup Security SettingsDisable Snmp Snmp Community NameDisable Web Server Disable Tftp Firmware UpgradeDisable Port 77FE Hex Disable Echo PortsCommand syntax telnet Encryption TutorialDisable Port 77F0 Hex Factory DefaultsEnable Enhanced Password Channel 1 Configuration DefaultsSecurity Settings Defaults Exit Configuration ModeExpert Settings Defaults Mail SettingsGpio Interface Configurable PinsFeatures Control ProtocolGuidelines CommandsByte 0 Command Types Command 12h, Get Active Levels Command 10h, Get FunctionsCommand 11h, Get Directions Command 13h, Get Current StatesExamples Command 1Ah, Set Active LevelsCommand 1Bh, Set States Command details Obtaining Firmware Reloading Firmware Using TftpUpdating Firmware ROM FileUser Guide Monitor Mode Commands Entering Monitor Mode via the Serial PortEntering Monitor Mode via the Network Port Monitoring the NetworkCommand Command Name Function Response MeaningProblem/Message Reason Solution TroubleshootingProblems and Error Messages Address and Network Class Please try again Caps Lock is not onServer, the No Connection With Technical Support Email eutechsupp@lantronix.com

XPort specifications

The Lantronix XPort is a compact and powerful embedded networking module that enables devices to connect to the Internet and communicate over a network. Small in size yet packed with features, the XPort is ideal for applications that require network connectivity without the complexity and cost associated with traditional networking solutions.

One of the standout features of the XPort is its small form factor. Measuring just 1.6 inches by 1.9 inches, it is designed for seamless integration into a variety of devices, making it a popular choice for manufacturers looking to add networking capabilities to their products without occupying much physical space.

The XPort utilizes the robust and widely used TCP/IP protocol stack, allowing it to facilitate reliable data communication over the Internet and other IP networks. This provides developers with a familiar framework for implementing network functionality, while also ensuring compatibility with various networking standards.

Equipped with a built-in web server, the XPort allows for easy configuration and management through a standard web browser. This user-friendly feature enables developers and end users to interact with the device effortlessly, simplifying tasks such as firmware updates and network settings adjustments.

Another key technology employed in the XPort is its serial-to-Ethernet capabilities. This feature converts serial data from devices into network packets, enabling legacy devices that communicate through serial ports to be connected to modern networks. This is particularly beneficial for industries with a significant number of legacy devices still in operation.

The XPort also incorporates security features, including SSL and SSH, which help protect data transmitted over the network. These security measures are essential in today's digital landscape, where data breaches and unauthorized access are growing concerns.

With its low power consumption and versatile applications, the Lantronix XPort is suitable for a variety of IoT applications, including healthcare devices, industrial automation, and smart metering. Its ability to operate in harsh environments enhances its appeal to manufacturers looking to deploy reliable networking solutions.

In summary, the Lantronix XPort offers a blend of compact design, advanced networking capabilities, and essential security features, making it a valuable asset for any project requiring efficient network connectivity. Its compatibility with existing technologies and ease of integration make it an ideal choice for modern IoT applications.
Top Page Image Contents