Lantronix XPort Exit Configuration Mode, Expert Settings Defaults, Security Settings Defaults

Page 44

4: Using Setup Mode for Configuration

Expert Settings Defaults

TCP keepalive

45 (seconds)

ARP cache timeout

600 (seconds)

 

 

High CPU performance mode

Disabled

(XPort-03 or greater only)

 

HTTP port number

0 (resulting in an operational value of 80)

 

 

SMTP port number

0 (resulting in an operational value of 25)

 

 

Security Settings Defaults

SNMP

Enabled

SNMP community name

public

 

 

Telnet setup

Enabled

 

 

TFTP download

Enabled

 

 

Port 77FEh

Enabled

 

 

Web Server

Enabled

 

 

ECHO

Disabled

 

 

Encryption

Disabled

 

 

Enhanced password

Disabled

 

 

Port 77F0h

Enabled

 

 

E-mail Settings

Priority

L

 

Min. notification interval

1

(second)

 

 

 

All other parameters

0

(e.g., e-mail notification and triggers are disabled)

 

 

 

Exit Configuration Mode

You have two options:

‹Select 8 to exit the configuration mode without saving any changes or rebooting, or

‹Select 9 to save all changes and reboot the device. All values are stored in nonvolatile memory.

XPort™ User Guide

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents XPort User Guide Copyright and Trademark Disclaimer and Revisions Date Rev CommentsContents Mail Settings Gpio Interface Chapter Summary Using This GuidePurpose and Audience Additional Documentation XPort Integration GuideApplications IntroductionCapabilities Protocol Support Addresses and Port NumbersHardware Address IP AddressAssigning an IP Address Using DeviceInstaller to Assign an IP Address Installing DeviceInstallerGetting Started Required InformationAssigning an IP Address Select Assign a specific IP address and click NextUsing Web-Manager to Configure the Unit Lantronix Web-ManagerUnit Configuration Settings Server Properties Port Properties Edit the following fields as necessaryDedicated Connection Connect Mode SettingsFlush Mode Input Buffer Additional Settings Packing AlgorithmFactory Settings Update SettingsUsing a Telnet Connection Using Setup Mode for ConfigurationAccessing Setup Mode Using the Serial Port Setup Menu OptionsSetup Mode Configuration Parameters Server Configuration Network Configuration Change Telnet Configuration PasswordSet Gateway IP Address Netmask Number of Bits for Host PartBaudrate Channel 1 Configuration Serial Port ParametersDhcp Name Interface Mode Mode XPort-485 onlyMode Option Common I/F Mode Setting Binary HexFlow Port NumberFlow Control Option Hex Port Numbers Reserved forIncoming Connection Connect ModeConnect Mode Option Response Autostart Automatic Connection HostlistWithout Echo Modem ModeDatagram Type Full Verbose 11. Modem Mode MessagesMessage Meaning Modem Mode Function Command 12. Modem Mode CommandsRemote IP Address Remote PortFlush Mode Buffer Flushing Disconnect Mode Option13. Disconnect Mode Options 14. Flush Mode OptionsPack Control OptionDisConnTime Inactivity Timeout Channel Port PasswordSend Characters Telnet Terminal TypeMail Settings Mail SetupExpert Settings Trigger SetupARP Cache timeout in seconds High CPU Performance modeMonitor Mode at Bootup RS-485 TX Enable Active LevelSecurity Settings Disable SnmpDisable Telnet Setup Snmp Community NameDisable Tftp Firmware Upgrade Disable Port 77FE HexDisable Web Server Disable Echo PortsCommand syntax telnet Encryption TutorialFactory Defaults Enable Enhanced PasswordDisable Port 77F0 Hex Channel 1 Configuration DefaultsExit Configuration Mode Expert Settings DefaultsSecurity Settings Defaults Mail SettingsConfigurable Pins FeaturesGpio Interface Control ProtocolGuidelines CommandsByte 0 Command Types Command 10h, Get Functions Command 11h, Get DirectionsCommand 12h, Get Active Levels Command 13h, Get Current StatesExamples Command 1Ah, Set Active LevelsCommand 1Bh, Set States Command details Using Tftp Updating FirmwareObtaining Firmware Reloading Firmware ROM FileUser Guide Entering Monitor Mode via the Serial Port Entering Monitor Mode via the Network PortMonitor Mode Commands Monitoring the NetworkCommand Command Name Function Response MeaningProblem/Message Reason Solution TroubleshootingProblems and Error Messages Address and Network Class Please try again Caps Lock is not onServer, the No Connection With Technical Support Email eutechsupp@lantronix.com

XPort specifications

The Lantronix XPort is a compact and powerful embedded networking module that enables devices to connect to the Internet and communicate over a network. Small in size yet packed with features, the XPort is ideal for applications that require network connectivity without the complexity and cost associated with traditional networking solutions.

One of the standout features of the XPort is its small form factor. Measuring just 1.6 inches by 1.9 inches, it is designed for seamless integration into a variety of devices, making it a popular choice for manufacturers looking to add networking capabilities to their products without occupying much physical space.

The XPort utilizes the robust and widely used TCP/IP protocol stack, allowing it to facilitate reliable data communication over the Internet and other IP networks. This provides developers with a familiar framework for implementing network functionality, while also ensuring compatibility with various networking standards.

Equipped with a built-in web server, the XPort allows for easy configuration and management through a standard web browser. This user-friendly feature enables developers and end users to interact with the device effortlessly, simplifying tasks such as firmware updates and network settings adjustments.

Another key technology employed in the XPort is its serial-to-Ethernet capabilities. This feature converts serial data from devices into network packets, enabling legacy devices that communicate through serial ports to be connected to modern networks. This is particularly beneficial for industries with a significant number of legacy devices still in operation.

The XPort also incorporates security features, including SSL and SSH, which help protect data transmitted over the network. These security measures are essential in today's digital landscape, where data breaches and unauthorized access are growing concerns.

With its low power consumption and versatile applications, the Lantronix XPort is suitable for a variety of IoT applications, including healthcare devices, industrial automation, and smart metering. Its ability to operate in harsh environments enhances its appeal to manufacturers looking to deploy reliable networking solutions.

In summary, the Lantronix XPort offers a blend of compact design, advanced networking capabilities, and essential security features, making it a valuable asset for any project requiring efficient network connectivity. Its compatibility with existing technologies and ease of integration make it an ideal choice for modern IoT applications.
Top Page Image Contents