Lantronix XPort manual Server Configuration Network Configuration, Set Gateway IP Address

Page 24

4: Using Setup Mode for Configuration

Server Configuration (Network Configuration)

The unit’s basic network parameters display when you select Server configuration (option 0). The IP Address, Set Gateway IP Address, and Netmask fields display the current values.

Figure 4-4. Server Configuration Parameters

IP Address : (000) .(000) .(000) .(000)

Set Gateway IP Address (N)

Netmask: Number of Bits for Host Part (0=default) (0)

Change telnet config password (N)

IP Address

The IP address must be set to a unique value in your network.

Set Gateway IP Address

The gateway address, or router, allows communication to other LAN segments. The gateway address should be the IP address of the router connected to the same LAN segment as the unit. The gateway address must be within the local network. The default is N (No), meaning the gateway address has not been set. To set the gateway address, type Y and enter the address.

Netmask: Number of Bits for Host Part

A netmask defines the number of bits taken from the IP address that are assigned for the host section.

Note: Class A: 24 bits; Class B: 16 bits; Class C: 8 bits

The unit prompts for the number of host bits to be entered, then calculates the netmask, which displays in standard decimal-dot notation when the saved parameters are displayed (for example, 255.255.255.0).

Table 4-1. Standard IP Network Netmasks

Network Class

Host Bits

Netmask

 

 

 

A

24

255.0.0.0

 

 

 

B

16

255.255.0.0

 

 

 

C

8

255.255.255.0

 

 

 

Change Telnet Configuration Password

Setting the Telnet configuration password prevents unauthorized access to the setup menu via a Telnet connection to port 9999 or via web pages. The password must have 4 characters. An enhanced password setting (for Telnet access only) of 16 characters is available under Security Settings.

Note: You don’t need a password to access the Setup Mode window via a serial connection.

XPort™ User Guide

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents XPort User Guide Copyright and Trademark Disclaimer and Revisions Date Rev CommentsContents Mail Settings Gpio Interface Using This Guide Purpose and AudienceChapter Summary Additional Documentation XPort Integration GuideIntroduction CapabilitiesApplications Protocol Support Addresses and Port NumbersHardware Address IP AddressAssigning an IP Address Using DeviceInstaller to Assign an IP Address Installing DeviceInstallerGetting Started Required InformationAssigning an IP Address Select Assign a specific IP address and click NextUsing Web-Manager to Configure the Unit Lantronix Web-ManagerUnit Configuration Settings Server Properties Port Properties Edit the following fields as necessaryConnect Mode Settings Flush Mode Input BufferDedicated Connection Additional Settings Packing AlgorithmFactory Settings Update SettingsUsing Setup Mode for Configuration Accessing Setup ModeUsing a Telnet Connection Using the Serial Port Setup Menu OptionsSetup Mode Configuration Parameters Server Configuration Network Configuration Change Telnet Configuration PasswordSet Gateway IP Address Netmask Number of Bits for Host PartChannel 1 Configuration Serial Port Parameters Dhcp NameBaudrate Interface Mode Mode XPort-485 onlyMode Option Common I/F Mode Setting Binary HexFlow Port NumberFlow Control Option Hex Port Numbers Reserved forConnect Mode Connect Mode OptionIncoming Connection Response Autostart Automatic Connection HostlistModem Mode Datagram TypeWithout Echo 11. Modem Mode Messages Message MeaningFull Verbose Modem Mode Function Command 12. Modem Mode CommandsRemote IP Address Remote PortFlush Mode Buffer Flushing Disconnect Mode Option13. Disconnect Mode Options 14. Flush Mode OptionsPack Control OptionDisConnTime Inactivity Timeout Channel Port PasswordSend Characters Telnet Terminal TypeMail Settings Mail SetupExpert Settings Trigger SetupARP Cache timeout in seconds High CPU Performance modeMonitor Mode at Bootup RS-485 TX Enable Active LevelSecurity Settings Disable SnmpDisable Telnet Setup Snmp Community NameDisable Tftp Firmware Upgrade Disable Port 77FE HexDisable Web Server Disable Echo PortsCommand syntax telnet Encryption TutorialFactory Defaults Enable Enhanced PasswordDisable Port 77F0 Hex Channel 1 Configuration DefaultsExit Configuration Mode Expert Settings DefaultsSecurity Settings Defaults Mail SettingsConfigurable Pins FeaturesGpio Interface Control ProtocolCommands Byte 0 Command TypesGuidelines Command 10h, Get Functions Command 11h, Get DirectionsCommand 12h, Get Active Levels Command 13h, Get Current StatesCommand 1Ah, Set Active Levels Command 1Bh, Set StatesExamples Command details Using Tftp Updating FirmwareObtaining Firmware Reloading Firmware ROM FileUser Guide Entering Monitor Mode via the Serial Port Entering Monitor Mode via the Network PortMonitor Mode Commands Monitoring the NetworkCommand Command Name Function Response MeaningTroubleshooting Problems and Error MessagesProblem/Message Reason Solution Address and Network Class Please try again Caps Lock is not onServer, the No Connection With Technical Support Email eutechsupp@lantronix.com

XPort specifications

The Lantronix XPort is a compact and powerful embedded networking module that enables devices to connect to the Internet and communicate over a network. Small in size yet packed with features, the XPort is ideal for applications that require network connectivity without the complexity and cost associated with traditional networking solutions.

One of the standout features of the XPort is its small form factor. Measuring just 1.6 inches by 1.9 inches, it is designed for seamless integration into a variety of devices, making it a popular choice for manufacturers looking to add networking capabilities to their products without occupying much physical space.

The XPort utilizes the robust and widely used TCP/IP protocol stack, allowing it to facilitate reliable data communication over the Internet and other IP networks. This provides developers with a familiar framework for implementing network functionality, while also ensuring compatibility with various networking standards.

Equipped with a built-in web server, the XPort allows for easy configuration and management through a standard web browser. This user-friendly feature enables developers and end users to interact with the device effortlessly, simplifying tasks such as firmware updates and network settings adjustments.

Another key technology employed in the XPort is its serial-to-Ethernet capabilities. This feature converts serial data from devices into network packets, enabling legacy devices that communicate through serial ports to be connected to modern networks. This is particularly beneficial for industries with a significant number of legacy devices still in operation.

The XPort also incorporates security features, including SSL and SSH, which help protect data transmitted over the network. These security measures are essential in today's digital landscape, where data breaches and unauthorized access are growing concerns.

With its low power consumption and versatile applications, the Lantronix XPort is suitable for a variety of IoT applications, including healthcare devices, industrial automation, and smart metering. Its ability to operate in harsh environments enhances its appeal to manufacturers looking to deploy reliable networking solutions.

In summary, the Lantronix XPort offers a blend of compact design, advanced networking capabilities, and essential security features, making it a valuable asset for any project requiring efficient network connectivity. Its compatibility with existing technologies and ease of integration make it an ideal choice for modern IoT applications.
Top Page Image Contents