Lantronix EDS-MD8, EDS-MD16, EDS-MD4 manual Installing the EDS-MD, Finding a Suitable Location

Page 27

 

 

3: Installation of EDS-MD4/8/16 Device Servers

 

 

 

 

Category (continued)

Description

 

PHYSICALS

 

 

 

 

 

Dimensions

L x W x H = 8.25 x 7.5 x 2.4 in. (21 x 19 x 6 cm)

 

 

 

 

Weight

16-port = 2.0 lbs (0.9 Kg)

 

 

8-port = 1.8 lbs (0.82 Kg)

 

 

4-port = 1.75 lbs (0.8 Kg)

 

 

 

 

Environmental

Temperature Operating 0° to 55°C (32° to 131°F)

 

 

Temperature for Transportation and Storage -30° to 80°C

 

 

Humidity 0% to 95% non-condensing

 

 

Atmospheric Pressure 50 kPa to 105 kPa

 

 

 

 

Humidity Operating

20% to 90% relative humidity, non-condensing

 

 

 

Installing the EDS-MD

Finding a Suitable Location

You can install the EDS-MD4, EDS-MD8 or EDS-MD16 either on a shelf, on a desktop or mounted on the wall.

If using AC power, do not use outlets controlled by a wall switch.

Connect the EDS-MD to one or more serial devices

All EDS-MD serial ports support RS-232 devices.

1.Power off the serial devices.

2.Attach a CAT 5 serial cable between the EDS-MD and your serial device. See Appendix D: Lantronix Cables, Adapters and Serial Port Pinouts (on page 93), for a list of cables and adapters you can use.

3.Connect an Ethernet cable between the EDS-MD Ethernet port and your Ethernet network.

4.Insert the power cord into the back of the EDS-MD. Plug the other end into an AC wall outlet.

5.Power up the serial devices.

EDS-MD User Guide

27

Image 27
Contents TM User Guide Revision History Warranty ContactsCopyright & Trademark DisclaimerTable of Contents Using This GuideIntroduction Line and Tunnel Settings Installation of EDS-MD4/8/16 Device ServersUsing DeviceInstaller Configuration Using Web ManagerNetwork Settings Services Settings Terminal and Host SettingsMaintenance and Diagnostics Settings Security SettingsEDS-MD User Guide Advanced Settings Updating Firmware VIP SettingsBranding the EDS-MD4/8/16 1EDS-MD Product Label List of FiguresList of Tables EDS-MD User Guide Using This Guide Purpose and AudienceSummary of Chapters Grounding Safety InformationCover Power Plug Input SupplyBattery Wall MountingPort Connections Electromagnetic Interference Cleaning InstructionsEquipment Classifications Environmental Conditions for Transportation and StorageDocument Description Additional DocumentationProtocol Support Key FeaturesIntroduction ApplicationsHardware Address Troubleshooting CapabilitiesConfiguration Methods Addresses and Port NumbersPort Numbers Product Information LabelIdentifying Hardware Components Installation of EDS-MD4/8/16 Device ServersPackage Contents User-Supplied ItemsSystem LEDs on the Top of EDS-MD Serial PortsEthernet Port LEDsGreen Red Off Reset to Default ButtonSerial Indicator LEDs on the Top of EDS-MD RJ45 LEDs on the Back Panel Ethernet IndicatorsCategory Description Technical SpecificationInstalling the EDS-MD Finding a Suitable LocationConnect the EDS-MD to one or more serial devices Device Detail Summary Using DeviceInstallerAccessing EDS-MD Using DeviceInstaller Current Settings DescriptionGroup Supports Configurable PinsTelnet Enabled Web EnabledAccessing Web Manager Configuration Using Web ManagerDevice Status Help Area Web Manager Page ComponentsWeb Manager Description See Navigating the Web ManagerTunnel SyslogSystem TerminalLine Settings Description Line and Tunnel SettingsLine Settings Line Configuration SettingsTo View Line Statistics To Configure Line SettingsLine Command Mode Settings Line Command Description Mode SettingsTunnel Serial Settings Tunnel SettingsSerial Settings To Configure Tunnel Serial SettingsTunnel Packing Mode Description Settings Packing ModeTo Configure Tunnel Packing Mode Settings Tunnel Packing Mode SettingsLocal Port Accept ModeTunnel Accept Mode Settings Tunnel Accept Mode Description SettingsTo Configure Tunnel Accept Mode Settings Reconnect Timer Connect ModeTunnel Connect Mode Settings Tunnel Connect Mode Description SettingsTunnel Disconnect Description Mode Settings To Configure Tunnel Connect Mode SettingsDisconnect Mode Tunnel Disconnect Mode SettingsTunnel Modem Description Emulation Settings To Configure Tunnel Disconnect Mode SettingsLine and Tunnel Settings Tunnel Modem Emulation SettingsTo Configure Tunnel Modem Emulation Settings StatisticsTo View Tunnel Statistics  Include in your file statusgroup name=tunnel instance=1 Network Interface Description Settings Network SettingsNetwork Interface Settings Network Interface SettingsTo View Network Interface Status To Configure Network Interface SettingsNetwork 1 Ethernet eth0 Description Link Settings Network Link SettingsTo Configure Network Link Settings Network 1 eth0 Link SettingsTerminal and Host Settings Terminal SettingsTerminal on Network and Line Settings Host Configuration Host ConfigurationTo Configure the Terminal Network Connection To Configure the Terminal Line ConnectionRemote Port To Configure Host SettingsSSH Username Remote AddressDNS Settings Services SettingsDNS Settings To View or Configure DNS SettingsFTP Settings FTP SettingsSyslog Settings To Configure FTP SettingsHttp Settings To View or Configure Syslog SettingsHttp Settings Description To Configure Http Settings Http Authentication Settings DescriptionEnter the Uniform Resource Identifier URI RSS Settings RSS SettingsTo Configure Http Authentication To Configure RSS SettingsReal Time Clock RTC Settings To Configure RTC SettingsRTC Settings Description SSH Server Host Keys Security SettingsSSH Settings RSS Settings DescriptionSSH Client Known Hosts SSH Server Authorized UsersSSH Client Known Hosts SSH Client Users Remote CommandSSH Client Users SSH Server Authorized UsersTo Configure SSH Settings SSL SettingsTo Create a New Credential Certificate and Key Generation SettingsCertificate Generation Description Settings Certificate and Key GenerationUpload Description Certificate Settings Certificate Upload SettingsTo Configure an Existing SSL Credential Upload Certificate SettingsTrusted Authority Settings Trusted AuthoritiesTo Upload an Authority Certificate File Display Maintenance and Diagnostics SettingsFilesystem Settings File Display SettingsFile Transfer File Modification SettingsFile Transfer Settings File ModificationTo Transfer or Modify Filesystem Files IP Network Stack SettingsTo Configure IP Network Stack Settings Protocol Stack Description IP SettingsProtocol Stack Description Icmp Settings To Configure Icmp Network Stack SettingsTo Configure ARP Network Stack Settings Icmp Network Stack SettingsQuery Port To Configure Smtp Network Stack SettingsTo Configure Query Port Settings Query Port SettingsTo View the List of IP Sockets DiagnosticsHardware To View Hardware Information IP SocketsTraceroute Ping Settings10 Traceroute Settings To Ping a Remote HostMemory To Configure the Diagnostic Log Output11 Log Settings LogTo View Thread Information ThreadsProcesses To View Process InformationSystem Settings Description System SettingsTo Reboot or Restore Factory Defaults 12 System SettingsEmail Configuration Description Settings Advanced SettingsEmail Settings To View, Configure and Send EmailCLI Configuration Settings Command Line Interface SettingsBasic CLI Settings To View and Configure Basic CLI SettingsTelnet Settings Telnet SettingsTo Configure Telnet Settings SSH SettingsXML Export Configuration Description Settings XML SettingsXML Export Configuration XML Exporting ConfigurationTo Export in XML Format To Export Configuration in XML FormatXML Export Status Description Settings XML Export StatusTo Import Configuration in XML Format XML Import ConfigurationImport Configuration from External File Import Configuration from the FilesystemObtaining Firmware Loading New Firmware Updating FirmwareVirtual IP VIP Status VIP SettingsVirtual IP VIP Configuration To Configure VIP SettingsVIP Counters Description Virtual IP VIP CountersTo View VIP Counters VIP CountersWeb Manager Customization Branding the EDS-MD4/8/16To Customize Short or Long Names Short and Long Name SettingsName Settings Description Short and Long Name CustomizationTechnical Support Europe, Middle East, Africa Appendix a Technical SupportScientific Calculator Appendix B Binary to Hexadecimal ConversionsConverting Binary to Hexadecimal Conversion TableClick Hex. The hexadecimal value appears Emissions Immunity Appendix C ComplianceApplicable Medical Standards Applicable ITE StandardsStandard Description Regulatory ComplianceSuppliers Declaration of Conformity RoHS Notice Cables and Adapters Lantronix Cables and AdaptersLantronix P/N Description Applications RJ45 Receptacle to DB25M DCE Adapter PN RJ45 Receptacle to DB25M DTE Adapter PN 200.2066ARJ45 Receptacle to DB25F DTE Adapter PN 200.2067A RJ45 Receptacle to DB9M DTE Adapter PN 200.2069A RJ45 Receptacle to DB9F DTE Adapter PN 200.2070A 10 RJ45 to RJ45 Adapter ADP010104-01