4:Using DeviceInstaller
This chapter covers the steps for locating a
Notes:
For instructions on using DeviceInstaller to configure the IP address and related settings or for more advanced features, see the DeviceInstaller Online Help.
Auto IP generates a random IP address in the range of 169.254.0.1 to 169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is found. These addresses are not routable.
Accessing EDS-MD Using DeviceInstaller
Note: Make note of the MAC address. It is needed to locate the
To use the DeviceInstaller utility, first install the latest version from the downloads page on the Lantronix web site www.lantronix.com/downloads.
1.Run the executable to start the installation process and respond to the installation wizard prompts. (If prompted to select an installation type, select Typical.)
2.Click Start
3.When DeviceInstaller starts, it will perform a network device search. To perform another search, click Search.
4.Expand the
5.Select the
6.On the right page, click the Device Details tab. The current
Device Detail Summary
Note: The settings are Display Only in this table unless otherwise noted
Current Settings | Description | |
Name | Name identifying the | |
|
| |
DHCP Device Name | The name associated with the | |
the IP address was obtained dynamically. | ||
| ||
|
|
| 28 |