Lantronix EDS-MD8, EDS-MD16 To View or Configure Syslog Settings, Http Settings Description

	9: Services Settings
Syslog Settings	Description
(continued)
Severity Log Level	Specify the minimum level of system message the EDS-MD should log. This
	setting applies to all syslog facilities. The drop-down list in the Web Manager is
	in descending order of severity (e.g., Emergency is more severe than Alert.)

To View or Configure Syslog Settings:

Using Web Manager

To configure the Syslog, click Syslog in the menu.

Using the CLI

To enter the Syslog command level: enable -> config -> syslog

Using XML

Include in your file: <configgroup name=”syslog”>

HTTP Settings

Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating hypertext documents on the Internet. HTTP defines how messages are formatted and transmitted. It also defines the actions web servers and browsers should take in response to different commands. HTTP Authentication enables the requirement of usernames and passwords for access to the device.

	Table 9-4HTTP Settings
HTTP Settings	Description
State	Select to enable or disable the HTTP server:
	 Enabled (default)
	 Disabled
Port	Enter the port for the HTTP server to use. The default is 80.
Secure Port	Enter the port for the HTTPS server to use. The default is 443. The HTTP
	server only listens on the HTTPS Port when an SSL certificate is configured.
Secure Protocols	Select to enable or disable the following protocols:
	 SSL3 = Secure Sockets Layer version 3
	 TLS1.0 = Transport Layer Security version 1.0. TLS 1.0 is the successor of
	SSL3 as defined by the IETF.
	 TLS1.1 = Transport Layer Security version 1.1
	The protocols are enabled by default.
	Note: A server certificate and associated private key need to be installed in
	the SSL configuration section to use HTTPS.
Secure Credentials	Specify the name of the set of RSA and/or DSA certificates and keys to be
	used for the secure connection.

EDS-MD User Guide 54