Lantronix EDS-MD4 manual Group, Comments, Device Family, Type, Hardware Address, Firmware Version

Page 29

4: Using DeviceInstaller

Current Settings (continued)

Description

 

Configurable field. Enter a group to categorize the EDS-MD. Double-

Group

click the field, type in the value, and press Enter to complete. This group

name is local to this PC and is not visible on other PCs or laptops using

 

 

DeviceInstaller.

 

 

 

Configurable field. Enter comments for the EDS-MD. Double-click the

Comments

field, type in the value, and press Enter to complete. This description or

comment is local to this PC and is not visible on other PCs or laptops

 

 

using DeviceInstaller.

 

 

Device Family

Shows the EDS device family type as “EDS”.

 

 

Type

Shows the device type as “EDS-MD”.

 

 

ID

Shows the EDS-MD ID embedded within the unit.

 

 

Hardware Address

Shows the EDS-MD hardware (MAC) address.

 

 

Firmware Version

Shows the firmware currently installed on the EDS-MD.

 

 

Extended Firmware Version

Provides additional information on the firmware version.

 

 

 

Shows the EDS-MD status as Online, Offline, Unreachable (the EDS-

Online Status

MD is on a different subnet), or Busy (the EDS-MD is currently

 

performing a task).

 

 

IP Address

Shows the EDS-MD current IP address. To change the IP address, click

the Assign IP button on the DeviceInstaller menu bar.

 

 

 

 

Appears “Dynamically” if the EDS-MD automatically received an IP

 

address (e.g., from DHCP). Appears “Statically” if the IP address was

IP Address was Obtained

configured manually.

If the IP address was assigned dynamically, the following fields appear:

 

 

Obtain via DHCP with values of True or False.

 

Obtain via BOOTP with values of True or False.

 

 

Subnet Mask

Shows the subnet mask specifying the network segment on which the

EDS-MD resides.

 

 

 

Gateway

Shows the IP address of the router of this network.

There is no default.

 

 

 

Number of Ports

Shows the number of serial ports on this EDS-MD.

 

 

Supports Configurable Pins

Shows False, indicating configurable pins are not available on the EDS-

MD.

 

 

 

Supports Email Triggers

Shows True, indicating email triggers are available on the EDS-MD.

 

 

Telnet Enabled

Indicates whether Telnet is enabled on this EDS-MD.

 

 

Telnet Port

Shows the EDS-MD port for Telnet sessions.

 

 

Web Enabled

Indicates whether Web Manager access is enabled on this EDS-MD.

 

 

Web Port

Shows the EDS-MD port for Web Manager configuration (if Web

Enabled field is True).

 

 

 

Firmware Upgradable

Shows True, indicating the EDS-MD firmware is upgradable as newer

versions become available.

 

 

 

EDS-MD User Guide

29

Image 29
Contents TM User Guide Copyright & Trademark Warranty ContactsDisclaimer Revision HistoryIntroduction Table of ContentsUsing This Guide Using DeviceInstaller Installation of EDS-MD4/8/16 Device ServersConfiguration Using Web Manager Line and Tunnel SettingsNetwork Settings Services Settings Terminal and Host SettingsMaintenance and Diagnostics Settings Security SettingsEDS-MD User Guide Advanced Settings Updating Firmware VIP SettingsBranding the EDS-MD4/8/16 1EDS-MD Product Label List of FiguresList of Tables EDS-MD User Guide Summary of Chapters Using This GuidePurpose and Audience Cover Power Plug Safety InformationInput Supply GroundingPort Connections BatteryWall Mounting Equipment Classifications Cleaning InstructionsEnvironmental Conditions for Transportation and Storage Electromagnetic InterferenceDocument Description Additional DocumentationIntroduction Key FeaturesApplications Protocol SupportConfiguration Methods Troubleshooting CapabilitiesAddresses and Port Numbers Hardware AddressPort Numbers Product Information LabelPackage Contents Installation of EDS-MD4/8/16 Device ServersUser-Supplied Items Identifying Hardware ComponentsEthernet Port Serial PortsLEDs System LEDs on the Top of EDS-MDSerial Indicator LEDs on the Top of EDS-MD Reset to Default ButtonRJ45 LEDs on the Back Panel Ethernet Indicators Green Red OffCategory Description Technical SpecificationConnect the EDS-MD to one or more serial devices Installing the EDS-MDFinding a Suitable Location Accessing EDS-MD Using DeviceInstaller Using DeviceInstallerCurrent Settings Description Device Detail SummaryTelnet Enabled Supports Configurable PinsWeb Enabled GroupAccessing Web Manager Configuration Using Web ManagerDevice Status Help Area Web Manager Page ComponentsWeb Manager Description See Navigating the Web ManagerSystem SyslogTerminal TunnelLine Settings Line and Tunnel SettingsLine Configuration Settings Line Settings DescriptionLine Command Mode Settings To Configure Line SettingsLine Command Description Mode Settings To View Line StatisticsSerial Settings Tunnel SettingsTo Configure Tunnel Serial Settings Tunnel Serial SettingsTo Configure Tunnel Packing Mode Settings Packing ModeTunnel Packing Mode Settings Tunnel Packing Mode Description SettingsTunnel Accept Mode Settings Accept ModeTunnel Accept Mode Description Settings Local PortTo Configure Tunnel Accept Mode Settings Tunnel Connect Mode Settings Connect ModeTunnel Connect Mode Description Settings Reconnect TimerDisconnect Mode To Configure Tunnel Connect Mode SettingsTunnel Disconnect Mode Settings Tunnel Disconnect Description Mode SettingsLine and Tunnel Settings To Configure Tunnel Disconnect Mode SettingsTunnel Modem Emulation Settings Tunnel Modem Description Emulation SettingsTo View Tunnel Statistics To Configure Tunnel Modem Emulation SettingsStatistics  Include in your file statusgroup name=tunnel instance=1 Network Interface Settings Network SettingsNetwork Interface Settings Network Interface Description SettingsTo View Network Interface Status To Configure Network Interface SettingsTo Configure Network Link Settings Network Link SettingsNetwork 1 eth0 Link Settings Network 1 Ethernet eth0 Description Link SettingsTerminal on Network and Line Settings Terminal and Host SettingsTerminal Settings To Configure the Terminal Network Connection Host ConfigurationTo Configure the Terminal Line Connection Host ConfigurationSSH Username To Configure Host SettingsRemote Address Remote PortDNS Settings Services SettingsTo View or Configure DNS Settings DNS SettingsSyslog Settings FTP SettingsTo Configure FTP Settings FTP SettingsHttp Settings Description Http SettingsTo View or Configure Syslog Settings Enter the Uniform Resource Identifier URI To Configure Http SettingsHttp Authentication Settings Description To Configure Http Authentication RSS SettingsTo Configure RSS Settings RSS SettingsRTC Settings Description Real Time Clock RTC SettingsTo Configure RTC Settings SSH Settings Security SettingsRSS Settings Description SSH Server Host KeysSSH Client Known Hosts SSH Client Known HostsSSH Server Authorized Users SSH Client Users Remote CommandSSH Server Authorized Users SSH Client UsersTo Configure SSH Settings SSL SettingsCertificate Generation Description Settings Certificate and Key Generation SettingsCertificate and Key Generation To Create a New CredentialTo Configure an Existing SSL Credential Certificate Upload SettingsUpload Certificate Settings Upload Description Certificate SettingsTo Upload an Authority Certificate Trusted Authority SettingsTrusted Authorities Filesystem Settings Maintenance and Diagnostics SettingsFile Display Settings File DisplayFile Transfer Settings File Modification SettingsFile Modification File TransferTo Configure IP Network Stack Settings IP Network Stack SettingsProtocol Stack Description IP Settings To Transfer or Modify Filesystem FilesTo Configure ARP Network Stack Settings To Configure Icmp Network Stack SettingsIcmp Network Stack Settings Protocol Stack Description Icmp SettingsTo Configure Query Port Settings To Configure Smtp Network Stack SettingsQuery Port Settings Query PortHardware To View Hardware Information DiagnosticsIP Sockets To View the List of IP Sockets10 Traceroute Settings Ping SettingsTo Ping a Remote Host Traceroute11 Log Settings To Configure the Diagnostic Log OutputLog MemoryProcesses ThreadsTo View Process Information To View Thread InformationTo Reboot or Restore Factory Defaults System Settings12 System Settings System Settings DescriptionEmail Settings Advanced SettingsTo View, Configure and Send Email Email Configuration Description SettingsBasic CLI Settings Command Line Interface SettingsTo View and Configure Basic CLI Settings CLI Configuration SettingsTo Configure Telnet Settings Telnet SettingsSSH Settings Telnet SettingsXML Export Configuration XML SettingsXML Exporting Configuration XML Export Configuration Description SettingsXML Export Status Description Settings To Export Configuration in XML FormatXML Export Status To Export in XML FormatImport Configuration from External File XML Import ConfigurationImport Configuration from the Filesystem To Import Configuration in XML FormatObtaining Firmware Loading New Firmware Updating FirmwareVirtual IP VIP Configuration VIP SettingsTo Configure VIP Settings Virtual IP VIP StatusTo View VIP Counters Virtual IP VIP CountersVIP Counters VIP Counters DescriptionWeb Manager Customization Branding the EDS-MD4/8/16Name Settings Description Short and Long Name SettingsShort and Long Name Customization To Customize Short or Long NamesTechnical Support Europe, Middle East, Africa Appendix a Technical SupportConverting Binary to Hexadecimal Appendix B Binary to Hexadecimal ConversionsConversion Table Scientific CalculatorClick Hex. The hexadecimal value appears Applicable Medical Standards Appendix C ComplianceApplicable ITE Standards Emissions ImmunityStandard Description Regulatory ComplianceSuppliers Declaration of Conformity RoHS Notice Lantronix P/N Description Applications Cables and AdaptersLantronix Cables and Adapters RJ45 Receptacle to DB25M DCE Adapter PN RJ45 Receptacle to DB25M DTE Adapter PN 200.2066ARJ45 Receptacle to DB25F DTE Adapter PN 200.2067A RJ45 Receptacle to DB9M DTE Adapter PN 200.2069A RJ45 Receptacle to DB9F DTE Adapter PN 200.2070A 10 RJ45 to RJ45 Adapter ADP010104-01