Lantronix EDS-MD4, EDS-MD8 manual To Ping a Remote Host, To Perform a Traceroute, Ping Settings

	11: Maintenance and Diagnostics Settings
	Table 11-9 Ping Settings
Diagnostics: Ping Settings	Description
Host	Enter the IP address or host name for the EDS-MD to ping.
Count	Enter the number of ping packets EDS-MD should attempt to send to the
	Host. The default is 5.
Timeout	Enter the time, in seconds, for the EDS-MD to wait for a response from
	the host before timing out. The default is 5 seconds.
To Ping a Remote Host
Using Web Manager

To ping a Remote Host, click Diagnostics in the menu and select Ping.

Using the CLI

To enter the command level: enable

Using XML

Not applicable.

Traceroute

Here you can trace a packet from the EDS-MD4/8/16 to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine where the longest delays are occurring.

	Table 11-10 Traceroute Settings
Diagnostics:	Description
Traceroute Settings
Host	Enter the IP address or DNS hostname. This address is used to show the path
	between it and the EDS-MD when issuing the traceroute command.

To Perform a Traceroute

Using Web Manager

To perform a Traceroute, click Diagnostics in the menu and select Traceroute.

Using the CLI

To enter the command level: enable

Using XML

Not applicable.

EDS-MD User Guide 71