Lantronix EDS-MD4, EDS-MD8, EDS-MD16 manual System Settings, To Reboot or Restore Factory Defaults

11: Maintenance and Diagnostics Settings

System Settings

The EDS-MD4/8/16 System settings allow for rebooting the device, restoring factory defaults, uploading new firmware and updating a system’s short and long name.

Note: Anytime you reboot the unit, this operation will take some time to complete. Please wait a minimum of 5 seconds after rebooting the unit before attempting to make any subsequent connections.

	Table 11-12 System Settings
System Settings	Description
Reboot Device	Reboots the device.
Restore Factory Defaults	Restores the device to the original factory settings. All configuration will be
	lost. The EDS-MD automatically reboots upon setting back to the defaults.
Upload New Firmware	FTP to the EDS-MD. Write the new firmware file to firmware.rom on the
	EDS-MD. The device automatically reboots upon the installation of new
	firmware. See the section, FTP Settings on page 53.
Short Name	Enter a short name for the system name. A maximum of 32 characters are
	allowed.
Long Name	Enter a long name for the system name. A maximum of 64 characters are
	allowed.

To Reboot or Restore Factory Defaults

Using Web Manager

To access the area with options to reboot, restore to factory defaults, upload new firmware, update the system name (long or short names) or to view the current configuration, click System in the menu.

Using the CLI

To enter the command level: enable

Using XML

 Include in your file: <configgroup name=”xml import control”>

EDS-MD User Guide 74