Lantronix EDS-MD8, EDS-MD16, EDS-MD4 manual Configuration Using Web Manager, Accessing Web Manager

5:Configuration Using Web Manager

This chapter describes how to configure the EDS-MD4, EDS-MD8 and EDS-MD16 using Web Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is retained without power. All changes take effect immediately, unless otherwise noted. It contains the following sections:

Accessing Web Manager

Web Manager Page Components

Navigating the Web Manager

Accessing Web Manager

Note: You can also access the Web Manager by selecting the Web Configuration tab on the DeviceInstaller window.

To access Web Manager, perform the following steps:

1.Open a standard web browser. Lantronix supports the latest version of Internet Explorer, Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.

2.Enter the IP address of the EDS-MD4/8/16 in the address bar. The IP address may have been assigned manually using DeviceInstaller (see the EDS-MD Quick Start Guide) or automatically by DHCP.

3.Enter your username and password.The factory-default username is “admin” and the password is “PASS.” The Device Status web page displays configuration, network settings, line settings, tunneling settings, and product information.

Note: The Logout button is available on any web page. Logging out of the web page would force re-authentication to take place the next time the web page is accessed.

EDS-MD User Guide 30