Lantronix 900-618 manual Connect Protocol, Connect Mode Passive Connection, Endpoint Configuration

4: Configuration Using Web Manager

2. In the available fields, enter or modify the following information:

Connect Protocol

Protocol

From the drop-down menu, select TCP.

Connect Mode: Passive Connection

Accept Incoming	Select Yes to accept incoming connections. The default is
	Yes.
Required	Determines whether a password is required for an incoming
	passive connection. This field is not available when a
	password is set for Telnet mode.
Password	If Password Required was set to Yes, enter the password for
	passive connections.

Connect Mode: Active Connection

Active Connect	Select None to disable Active Connect. Otherwise, indicate
	the connection type from the drop-down list:
	 With Any Character: Attempts to connect when any
	character is received from the serial port.
	 With Active Mdm Ctrl In: Accepts external connection
	requests only when the Modem Control In input is
	asserted.
	 With Start Character: Attempts to connect when it
	receives a specific start character from the serial port.
	The default start character is carriage return.
	 Manual Connection: Attempts to connect when
	directed by a command string received from the serial
	port.
	 Auto Start: Automatically connects to the remote IP
	address and port after booting up.
Start Character	If Active Connect is set to With Start Character, enter the
	start character in this field.
Modem Mode	Indicates the on-screen response type when in Modem Mode
	(if Modem Mode is enabled).
Show IP Address After	Indicates whether to display the remote IP address upon
Ring	connection. The default setting is Yes.

Endpoint Configuration

Local Port	Enter the local port number.
Auto increment for	Select to auto-increment the local port number for new
active connect	outgoing connections. The range of auto-incremented port
	numbers is 50,000 to 59,999 and loops back to the beginning
	when the maximum range is reached.
Remote Port	Enter the remote port number.
Remote Host	Enter the IP address of the remote device.

Common Options

Telnet Com Port Cntrl

This field is available for configuration only when Active

xPico User Guide 29