LaCie 2 user manual Reset to Factory

LaCie Network Space 2 • DESIGN BY NEIL POULTON	Administering Your LaCie Network Space 2
User Manual	page 54

4.16. Reset to Factory

CAUTION: Resetting the product will erase all Dashboard data such as users, groups, shares, and settings.

If for any reason you wish to reset your hard drive to its out-of-the- box state, follow the procedure below.

After resetting to default, all files will be moved to a folder called Recovery in MyShare and so by default will be available only to the administrator.

1. Make certain that the Network Space 2 is off.

1.Press and hold the power button for 10 seconds. Release the button when the LED becomes solid red.

2.When the LED begins blinking red, press the button again. (It will only blink red for five seconds, so you must press the button again to confirm reset before the end of the five seconds. If you don’t press the button while the red light is blinking, the drive will start normally and the reset process will be aborted.)

3.When successfully reset, the Network Space 2 will restart auto- motically, returning to its factory settings.