LevelOne WBR-1400TX, WBR-1100TX manual Ato

LevelOne Wireless Broadband Router User Guide

ATLn		Speaker volume control. n=0-7
ATMn		Speaker control
	M0	Speaker always off
	M1	Speaker on until carrier is detected
	M2	Speaker always on
	M3	Speaker on after last digit dialed, off at carrier detect
ATNn		Ring volume control, n=0 disables ring function. (n=0..7)
ATO		Return to on-line state
ATP		Pulse dial
ATQn		Result code displayed
	Q0	Modem returns result code
	Q1	Modem does not return result code
	Q2	Return result code but quiet in answer mode (will not show in AT&Vn)
ATS0=n		Number of rings required before modem answers. n=0 disables auto-answer.
ATSr.b=n		Set bit b of S-register r to n. (n=0 or 1)
ATSr.b?		Inquiry bit b of S-register r
ATSr=n		Set S-register r to value n, where n is a decimal number between 0-255
ATSr?		Display value stored in S-register r
ATT		Tone dial
ATVn		Verbal/Numeric result codes
	V0	Display result codes in numeric form
	V1	Display result codes in verbose form
ATXn		Result code options. (n=0..7)
ATZn		Reset the modem and set power-on profile. (n=0..4)
	Zn	Reset modem and load user profile n (n=0..3)
	Z4	Reset modem and load factory settings
AT$		Help, Basic command summary
AT&$		Help, Extended AT& command summary
AT*$		Help, Extended AT* command summary

102