LevelOne WBR-1400TX, WBR-1100TX manual Printer Port, AppleTalk, Logical Printers

LevelOne Wireless Broadband Router User Guide

Printer Port

Normally, these settings do not need to be changed.

	Figure 46: Printer Port Screen
AppleTalk
AppleTalk zone	This determines which Apple systems can gain access to this
	printer. The default value is *, which allows access by all systems.
	If you enter another zone name, only Apple systems in that zone
	will be able to access the printer.
Printer Object Type	Sets the type of printer attached. The default setting is "Laser-
	Writer".
	If the "Printer Object Type" is incorrect, the printer will not be
	visible from your Apple system.
Communication	You must use the same setting as your Macintosh.
Protocol
Logical Printers
No (L1, L2, L3)	Logical printer configuration is only required if using LPD print-
	ing under Linux or Unix. Otherwise, these settings are ignored
	There are 3 Logical Printers (Ports), named L1, L2, and L3.
	These names cannot be changed, and must be used when selecting
	the logical printer from your Unix system.
Pre-string (HEX)	Enter (in HEX) the series of printer commands to be sent to the
	attached printer BEFORE each print job.
Post-string (HEX)	Enter (in HEX) the series of printer commands to be sent to the
	attached printer AFTER each print job.
LF to CR/LF	If checked, Unix-style LF (line feed) characters at the end of each
	line will be converted to CR/LF (carriage return/line feed) pairs,
	as used in MSDOS and Windows.

84