LevelOne WBR-1400TX, WBR-1100TX manual Data Modem Properties Screen

LevelOne Wireless Broadband Router User Guide

Modem Properties Screen

This screen is reached via the Modem Properties button on the Dial-inscreen.

•Normally, it is not necessary to change these settings.

•Refer to your Modem's user manual to determine the "AT" commands it supports.

	Figure 42: Modem Properties Screen
Data - Modem Properties Screen
Initial String	This is a series of AT commands used to correctly configure your
	modem or ISDN TA.
	See Appendix C - AT Commands for further details about the
	required Initial String settings and standard AT commands.
Dial Type	• Select Tone, Pulse or Other to match your system.
	• For Other, you must provide the Dial String.
Dial String	• This is the "AT" command sent to your modem before
	dialing. For example, "ATDT" tells your modem to use Tone
	Dialing.
	• Check your modem's documentation to find the correct AT
	commands.
Auto Answer Com-	• Enter the command strings which turn the "auto-answer"
mands	function in your modem (or ISDN TA) ON and OFF.
	• Check your modem's documentation to find these commands.

76