Operation and Status
| • Internet Access - This is the IP Address used by this device, as |
| seen by Internet users. This address is provided by your ISP. |
| • |
| IP Address is allocated by the DHCP Server function in the |
| LevelOne Wireless Broadband Router. |
|
|
User | There are 2 possibilities: |
| • For Internet Access, this shows the Internet Account name. |
| • For |
|
|
Phone Line Speed | The connection speed over the phone line, between your modem |
| and the number dialed, as reported by your modem. |
|
|
Serial Line Speed | The connection speed between this device and the modem. This |
| setting can be changed on the |
|
|
Connection Log |
|
|
|
Connection Log
This displays connection details.
See below for a description of the most common items in this log.
Connection Log
This shows the commands sent to the modem, and any status messages returned by the modem. Note that you must click Refresh to update the information.
The following table lists the common messages, and their meaning.
Message | Description |
Dialing | Dialing the ISP |
|
|
Try to establish | The device is trying to connect with the ISP, using the modem. |
physical connection. |
|
|
|
Busy | The number dialed was busy. |
|
|
Physical line is | Physical connection to ISP has been established. |
connected |
|
|
|
CONNECT nnnnnn | Physical connection was successful; nnnnnn indicates the speed of |
| the serial link as currently configured. |
|
|
Max phone line speed | nnnnnn is the maximum speed of the modem, according to the |
nnnnnn bps | current configuration. |
|
|
DCD low, | Physical line break, connection lost. |
DSR low |
|
|
|
send | "AT" commands sent to the modem are displayed as they are sent. |
wait | Commands in the Script file are also displayed as they are executed. |
|
|
Start PPP | Having established a physical connection, a PPP connection is now |
| being established. |
|
|
PPP up fail | The PPP connection could not be established. |
|
|
57